Electrical flush-mount junction box Simet P2x60D 2-gang 60 mm deep (model 32092203)

Flush-mount junction box Simet P2x60D is an in-wall electrical box designed for recessed installation in drywall, masonry or similar interior surfaces. The two-gang configuration and 60 mm installation depth provide space for mounting two switches, sockets or for making wiring splices behind the finished surface. The box is intended for indoor electrical finishing and offers secure cable entry and fixation compatible with standard round mounting cutouts.

Advantages

The Simet P2x60D junction box combines a compact two-gang layout with an increased depth that accommodates larger connectors and multiple conductors. Its design supports reliable cable fixation and stable mounting in recessed installations, reducing strain on connections. Made for standard installation practices, the box fits common circular cutouts and integrates with typical flush-mount frames and cover plates.

Suitable for

• Mounting two electrical switches in a single recessed installation
• Installing two power sockets or mixed socket-and-switch combinations
• Creating a safe space for splicing or terminating wiring behind drywall or plaster
• Retrofit or new-build indoor electrical finishing where standard round cutouts are used

Key specifications

• Configuration: two-gang (2 modules)
• Installation depth: 60 mm
• Application: flush/recessed in-wall installation for indoor use
• Compatibility: standard round mounting cutouts and typical flush frames
• Material properties: suitable for standard electrical fixtures and cable fixation in recessed installations

How to use

Cut the appropriate round opening in the wall material following local installation practices and ensure power is switched off before beginning work. Insert the junction box into the prepared hole, align it for the desired fixture positions and secure it according to the substrate and mounting method. Route and fix cables through the designated entry points, carry out terminations or splices inside the box, and install the switches or sockets on the box’s front. After connecting and testing circuits, attach the cover plate or frame to complete the flush installation.

Usage recommendations

Use the junction box only for indoor electrical installations and follow local electrical codes. Verify that the internal space and depth are sufficient for the chosen devices and connectors, and leave adequate bend radius for conductors. If in doubt about wiring or compliance, consult a qualified electrician.