Submersible pump sistema TVX 1100 HL P1-1100W — 1100 W, model 4126116

Submersible stainless steel water pump with a stainless steel impeller designed for draining settling tanks and pumping wastewater for household needs. The model TVX 1100 HL P1-1100W offers continuous operation and oil-filled chambers for motor cooling and bearing lubrication, making it suitable for extended use in domestic wastewater handling.

Advantages

The stainless steel construction and impeller provide corrosion resistance and durability. Dual oil chambers with mechanical seals ensure reliable motor cooling and bearing lubrication, while the permanently split capacitor motor and IP68 protection enable stable, continuous operation. A 10 m cable and 1 1/2" connection simplify installation.

Suitable for

• Draining decantation/settling tanks
• Pumping household wastewater and sewage
• Temporary or permanent removal of water in basements and utility rooms
• Applications requiring corrosion-resistant pump components

Key specifications

• Power: 1100 W
• Supply voltage: 230 V - 50 Hz
• Fluid temperature: up to 35°C
• Maximum immersion depth: 5 m
• Maximum flow: 18,000 l/h
• Maximum suction head: 8.2 m
• Inlet particle size: Ø 35 mm
• Minimum suction level: 65 mm
• Cable length: 10 m
• Connection: 1 1/2"
• Continuous operation; insulation class F; protection class IP68

How to use

Install the Submersible Pump TVX 1100 HL P1-1100W in the liquid to be pumped, ensuring the unit is fully submerged but not deeper than the maximum immersion depth of 5 m. Connect to a 230 V, 50 Hz supply and attach the discharge hose to the 1 1/2" outlet. Verify the cable routing is safe and the pump sits on a stable surface free of large debris that could obstruct the Ø 35 mm inlet. The pump supports continuous operation; monitor temperature of pumped liquid (max 35°C) and ensure proper ventilation when used in enclosed spaces.

Lietošanas ieteikumi

Use clean or domestic wastewater within specified limits, avoid pumping liquids hotter than 35°C, and periodically inspect mechanical seals and oil chambers for leaks. Maintain clearance around the inlet to prevent clogging by large solids exceeding Ø 35 mm.