Slim Wirewine SLIM Patchcords CAT6A 10 Gigabit LightPatch Cord 1.0 m U/FTP RJ-45 yellow 90-pack

SLIM Patchcords CAT6A 10 Gigabit LightPatch Cord, 1.0 m, U/FTP, Ø 3.8 mm, yellow — a thin, shielded Cat6A patch cable designed for 10 Gigabit Ethernet and high-density installations. The round, four-pair cable uses U/FTP shielding and a flame-retardant LSOH sheath. The RJ45 connector features an impact-resistant latch and a narrow, short boot for easy handling in confined spaces. Cable length: 1.0 m.

Advantages

The LightPatch design combines an extremely slim and flexible cable with full Cat6A performance for up to 10 Gbit/s data transfer. U/FTP shielding supports reliable signal integrity and PoE delivery while the LSOH outer sheath reduces flammability. A reinforced RJ45 plug with a break-proof latch and an innovative boot allows repeated latch bending and easy connection in crowded racks and tight cable channels.

Suitable for

• Patching in overcrowded server or network cabinets and narrow cable channels
• High‑density switches where short, flexible patch cords are needed between ports or to a patch panel
• Connecting endpoint devices at desks — VoIP phones, printers, PCs and notebooks
• Industrial or field applications where space is limited and flexible routing is required
• Technicians’ kits and notebook bags as a compact patch cord for on-site maintenance
• Discreet home routing under carpets, along skirting boards, or through window seals

When it may not be suitable

This 1.0 m light patch cord is designed for short patching and high-density use; it is not intended for permanent long-distance horizontal runs. For structured cabling over longer distances, full-installation Cat6A cables with appropriate management and conduits should be used. The thin diameter prioritizes flexibility and space savings over heavy mechanical robustness for harsh pulling or extended outdoor exposure.

Key specifications

• Category: Cat6A (channel measured)
• Data rate: up to 10,000 Mbit/s (10 Gigabit)
• Shielding: U/FTP (individual pair foil with overall braid absent)
• Conductor: 4 twisted pairs, AWG32, 100% copper
• Outer diameter: Ø 3.8 mm
• Sheath material: LSOH (flame-retardant)
• Connectors: RJ‑45 straight male — both ends
• Length: 1.0 m
• Power over Ethernet: supports IEEE 802.3af/at
• Colour: Yellow

How to use

Use the cable to connect switches, patch panels and endpoint devices over short distances within racks, cabinets or at workstations. Insert the RJ45 plug into the socket until the reinforced latch clicks. To remove, press the boot’s latch area and pull the connector straight out. Route the cable gently without sharp bends; its slim, flexible construction eases placement in tight spaces and under desks.

What to consider before purchase

• Intended use: short patching and high‑density connections rather than long permanent horizontal runs
• Length: 1.0 m may be too short for some layouts — verify required cable routing distance
• Environmental exposure: not specified for outdoor or prolonged mechanical stress
• Colour preference: yellow for easy visual identification in bundles

Usage recommendations

For best results in high-density environments, route LightPatch cords with minimal sharp bends and avoid excessive tensile force when pulling. Use these 1.0 m U/FTP Cat6A cords for short interconnects between switches, panels and devices where space saving and flexibility are priorities.