Boundary wire for robotic lawn mowers Smart 100 m

Boundary wire for robotic lawn mowers Smart 100 m is a 100-metre outdoor cable designed to define the mowing perimeter for compatible Smart robot mowers. The wire creates a clear boundary that routes the robotic mower along garden edges, around flowerbeds and obstacles, and helps maintain consistent coverage while preventing the mower from leaving the designated area. Intended for outdoor installation and integration with Smart systems, the wire provides a practical way to plan and adjust mowing layouts to match garden shapes and access points.

Advantages

The Smart boundary wire is weather-resistant and intended for long-term outdoor use when installed correctly. Its length of 100 metres suits small to medium garden layouts or perimeter setups with basic routing configurations. By providing a continuous electrical boundary, the wire ensures reliable detection by compatible robot mowers and reduces unintended crossings of paths, driveways or adjacent lawns. The cable is compatible with standard buried or surface mounting methods and can be joined to extension wire segments for larger areas.

Suitable for

• Defining the perimeter of small and medium-sized lawns
• Guiding robotic mowers around flowerbeds, trees and garden features
• Creating clear boundary lines to prevent mower escape
• Temporary or permanent outdoor installation with compatible Smart mower systems

Key specifications

• Cable length: 100 metres
• Intended use: outdoor boundary wire for robotic lawn mowers
• Compatibility: designed for use with compatible Smart robotic mower systems
• Installation methods: buried or surface-mounted routing
• Function: defines perimeter and transmits boundary signal to mower

How to use

Plan the boundary route before installation, marking the intended perimeter and mower access points. Lay the 100 m boundary wire following the manufacturer’s installation guidelines for Smart systems, using appropriate clips or staples for surface mounting or burying the wire just below the soil surface where required. Connect the wire to the charging station or boundary terminal of the compatible Smart mower system and test the boundary with the mower to confirm detection along the entire route. If larger coverage is needed, join additional compatible boundary wire segments following safe electrical connection practices.

Usage recommendations

Install the wire according to the Smart mower system manual, avoid tight bends that may stress the cable, and route the wire clear of high-traffic areas and sharp objects. For reliable operation, perform a detection test after installation and secure any exposed wire with recommended fasteners or bury to protect against mechanical damage and weathering.