Boundary wire for robotic lawn mowers Smart 50 m

Boundary wire for robotic lawn mowers Smart 50 m is a 50‑metre conductor designed to create a clear perimeter for compatible robotic mowers. The cable defines the working area, marks out islands such as flowerbeds and prevents the robot from leaving the lawn or entering restricted zones. It is suitable for surface fixation with pegs or for shallow burial, and it provides consistent signal transmission for robots that use an external perimeter wire.

Advantages

This 50 m boundary wire provides reliable boundary detection thanks to stable electrical conductivity and durable insulation that resists outdoor conditions. The cable is flexible for easy routing around curves and obstacles and can be fixed quickly with standard stakes or buried under turf. Installation requires no special tools and the wire supports accurate guidance along both external perimeters and internal islands, reducing the risk of missed areas or accidental crossings.

Suitable for

• Defining the mowing perimeter of domestic lawns
• Marking flowerbeds, trees and garden islands to exclude them from mowing
• Creating restricted zones around ponds, paths or play areas
• Extending or repairing existing perimeter systems for compatible robotic mowers

Key specifications

• Length: 50 metres
• Conductor type: single insulated copper conductor suitable for perimeter signal transmission
• Insulation: weather-resistant outer sheath designed for outdoor use
• Flexibility: suitable for routing around curves and obstacles
• Installation options: surface fixation with stakes or shallow burial under turf

How to use

Plan the perimeter layout before installation, including external edges and any internal islands to be excluded from mowing. Unroll the boundary wire along the planned route and secure it temporarily with pegs while you check the line. For permanent installation, lay the wire in a shallow trench or fix it to the surface with garden stakes at regular intervals. Connect both ends to the robot mower’s boundary terminals according to the mower manufacturer’s instructions and test the perimeter signal to confirm continuous detection around the entire loop.

Usage recommendations

Run the wire as close to the actual edge of the grass as practical to minimize visible cable and ensure precise navigation. Avoid sharp bends and crossing power cables or irrigation lines. When burying the wire, keep it just below the surface to allow future access for adjustments. Regularly inspect the wire and stake positions after extreme weather or lawn maintenance.