Socket SOLARIX CAT6 STP 1 x RJ45 white SX9-1-6-STP-WH

Socket SOLARIX CAT6 STP 1 x RJ45 white SX9-1-6-STP-WH is a single‑port, shielded Cat6 wall socket designed for installation flush with plaster or into conduit trunking. It follows German‑style dimensions and provides a 45° angled RJ45 port with a Krone IDC terminal block supporting AWG 26–22 conductors. The socket complies with structured cabling standards ANSI/TIA/EIA‑568, ISO/IEC 11801 and EN 50173 for Category 6 performance and is available in a white (RAL 9003) molded housing. A matching surface‑mount box (SX9-0-WH) allows surface installation when needed.

Advantages

The SOLARIX SX9 socket delivers Category 6 STP performance with 50 µ gold and 100 µ nickel plated contact protection, durable FR plastic housing (UL94‑0), and a Krone 8p8c IDC for reliable terminations. The angled port design facilitates easier cable routing, and the product is offered in both shielded and unshielded variants to match installation needs. It is built for longevity with a minimum of 1,000 mating cycles for the RJ45 port and at least 200 IDC insertions.

Suitable for

• Office Ethernet outlets using CAT6 STP cabling
• Data points in commercial buildings and home networks
• Flush installation in walls or inside parapet/trunking systems
• Surface mounting when used with SX9-0-WH surface box

Key specifications

• Category: CAT6 (STP)
• Supported protocols: 1000Base‑T, 1000Base‑TX
• Ports: 1 × RJ45 (45° angled)
• Shielding: yes
• IDC type: Krone 8p8c, conductor size AWG 26–22
• Contact plating: 50 µ gold over 100 µ nickel
• Modular design: no
• Minimum RJ45 life: 1000 insertions/removals; IDC life: 200 terminations
• Material (non‑metal parts): FR plastic, UL94‑0
• Color: white (RAL 9003)
• Dimensions: 80 × 80 mm
• Operating temperature: -10 to 60 °C; Storage: -40 to 70 °C
• Max. operating humidity: 93%

How to use

Install the socket into a suitable flush mounting box following local electrical and cabling regulations. Terminate CAT6 STP cable pairs into the Krone IDC block according to the chosen wiring scheme (T568A or T568B); the IDC block is colour‑coded for both standards. Ensure the cable shield is properly connected to the socket/box ground to maintain shielding continuity. If surface mounting is required, secure the socket into the SX9‑0‑WH surface box and route the cable accordingly.

Usage recommendations

For best performance, use with shielded CAT6 STP cabling and maintain proper grounding of the shield. Follow vendor and standard practices for cable terminations, avoid exceeding specified conductor sizes (AWG 26–22), and verify connections with appropriate network testing tools after installation.