Underfloor Heating Mat Sourcing HEATING MAT 150 W/m², 7.0 m² coverage

Sourcing HEATING MAT 150 W/m² is an electric underfloor heating mat designed to provide consistent radiant warmth beneath tile, stone or similar hard-floor finishes. With a power density of 150 watts per square meter and a total coverage area of 7.0 m², the mat delivers even heat distribution for residential and light-commercial interiors. The product comprises a pre-spaced heating cable fixed to a mesh backing to simplify placement and embedding in thin-set adhesive or self-leveling compound, making it suitable for renovations and new installations where floor-mounted radiant heat is required.

Advantages

The mat offers uniform surface temperature thanks to the evenly spaced heating conductor and fixed mesh, reducing cold spots and improving comfort. Its 150 W/m² output supports rapid warm-up and effective heat transfer through tile and stone coverings. Pre-assembled mesh construction streamlines installation, saving time when laying cable and ensuring correct spacing without additional measuring. The product is compatible with common floor levelling and adhesive systems used beneath rigid floor finishes.

Suitable for

• Bathrooms and ensuite rooms under tile or natural stone
• Kitchens with tiled floors or stone surfaces
• Renovation projects where existing floors are replaced or resurfaced
• Areas requiring supplemental localized heating in residential or light-commercial spaces

Key specifications

• Power density: 150 W/m²
• Coverage area: 7.0 m²
• Heating element: pre-spaced electric heating cable bonded to mesh backing
• Intended floor coverings: tile, stone or similar hard finishes
• Installation type: embedded in adhesive or levelling compound beneath floor finish

How to use

Prepare the subfloor to be clean, dry and level according to tile manufacturer recommendations. Unroll and position the heating mat on the subfloor, cut the mesh only to turn or fit around obstacles while keeping the heating cable intact. Fix the mat in place and apply thin-set adhesive or self-leveling compound to fully embed the mesh and heating conductor. Install floor tiles or stone on top using appropriate adhesive and grout. Connect the heating mat to a compatible thermostat and electrical supply through a qualified electrician, ensuring compliance with local wiring regulations and recommended temperature-sensing placement.

Usage recommendations

Use with a floor or room thermostat and appropriate floor sensor for accurate temperature control. Avoid installing the mat under loose-lay or floating floor finishes. For optimal performance and safety, have electrical connection and final commissioning performed by a licensed electrician and follow adhesive and tile manufacturer instructions for embedding the mat.