Slim CAT6 Ethernet Cable 2 m — StarTech.com, UTP 28AWG, 100W PoE, RJ45 slim snagless, LSZH

Slim CAT6 Ethernet Cable 2 m by StarTech.com is a 2-metre U/UTP patch cable designed for Gigabit networks and Power over Ethernet (PoE) delivery. Constructed with four pairs of 28 AWG pure bare copper conductors and a low-smoke zero-halogen (LSZH) jacket, this slim cable supports 10/100/1000Base-T connections and is tested to meet Category 6 performance. The cable uses slim snagless RJ45 connectors with 50-micron gold-plated contacts for a secure mating surface and reduced signal loss. Its reduced diameter and flexible jacket make it suitable for dense racks, patch panels and confined routing paths while maintaining support for up to 100W PoE.

Advantages

The slim profile is approximately 36% thinner than standard Cat6 cables, enabling easier routing in crowded network closets and improved airflow around equipment. Snagless connector boots protect the RJ45 clip during installation and reduce the chance of connector damage when pulling cables through panels or tight spaces. The LSZH jacket provides low smoke and low toxicity characteristics for installations where fire safety and regulatory compliance are important. Individually tested to Category 6 specifications, the cable offers controlled near-end crosstalk (NEXT) and return loss (RL) for reliable Gigabit performance and stable PoE power delivery.

Suitable for

• Patching between switches and patch panels in high-density racks
• Connecting PoE devices such as IP cameras, VoIP phones and access points
• Tight or constrained cable runs in offices, server rooms or telecom cabinets
• Installations requiring LSZH jacket material for safety or code compliance

Key specifications

• Cable length: 2 m
• Cabling type: Cat6 U/UTP (4-pair unshielded twisted pair)
• Conductor: 28 AWG pure bare copper (4 pairs)
• Data rates: supports 10/100/1000Base-T (Gigabit Ethernet)
• Power over Ethernet: supports up to 100 W (IEEE 802.3bt Type 4 / PoE++)
• Connector: slim snagless RJ45 plugs with 50-micron gold-plated contacts
• Jacket material: Low Smoke Zero Halogen (LSZH)
• Cable outer diameter: approximately 3.6 mm
• Frequency: up to 250 MHz
• Individually tested to meet Category 6 performance standards

How to use

Route the slim Cat6 cable between network equipment using the slim profile to ease passage through patch panels, cable managers and narrow gaps. Insert the RJ45 plug fully into the device or patch panel jack until the clip engages; the snagless boot protects the clip during installation. For PoE devices, confirm that the connected switch or injector and the powered device are compatible with IEEE 802.3bt Type 4 if you require full 100 W delivery. Avoid tight kinks and maintain recommended bend radius for consistent performance. Terminate only at compatible RJ45 jacks and avoid mixing shielded components with unshielded cabling to prevent performance issues.

Usage recommendations

For high-density deployments, route Slim Cat6 cables in organized bundles and use cable management panels to maintain airflow and access. Verify PoE power budgets before connecting multiple high-draw devices on the same switch. When installing in environments with fire-safety requirements, choose LSZH-jacketed cables such as this model to reduce smoke and toxic emission risks.