SFP+ Fiber Transceiver StarTech SFP10GLRST — 10GBASE-LR, 10GbE SMF LC 10 km, 1310 nm, DDM

The StarTech SFP10GLRST is a compatible SFP+ fiber transceiver module designed for 10GBASE-LR 10GbE links over single-mode fiber. It uses an LC connector and operates at a 1310 nm wavelength, supporting data rates up to 10 Gbit/s and link distances up to 10 km. The module follows the SFP+ form factor, offers Digital Diagnostics Monitoring (DDM) for real-time status reporting, and features a zinc-steel housing with a typical power consumption of approximately 1.3 W and a mean time between failures (MTBF) of about 2,104,865 hours. The transceiver is hot-swappable to allow maintenance or upgrades with minimal network disruption.

Advantages

This SFP+ transceiver provides long-reach 10GbE connectivity over single-mode fiber with support for DDM, enabling monitoring of optical parameters. The compact SFP+ form factor and LC interface make it compatible with a wide range of switches and routers that accept SFP+ modules. Low typical power consumption and a robust metal housing contribute to reliable operation in data center and enterprise networking environments. The module is supplied with lifetime warranty coverage from the manufacturer.

Suitable for

• Core and aggregation links in data center networks
• Distribution links between switches and routers over single-mode fiber
• Long-distance 10 Gigabit Ethernet connections up to 10 km
• Environments requiring transceiver monitoring via DDM

Key specifications

• Form factor: SFP+
• Supported standard: 10GBASE-LR (10 Gigabit Ethernet)
• Wavelength: 1310 nm
• Fiber type: Single-mode fiber
• Connector type: LC duplex
• Maximum data transfer rate: 10 Gbit/s
• Maximum reach: 10 km (approx. 6.2 miles)
• Digital Diagnostics Monitoring (DDM): Yes
• Typical power consumption: <= 1.3 W
• Housing material: zinc-steel (silver colour)
• Weight: 0.022 kg
• MTBF: ~2,104,865 hours

How to use

Insert the SFP10GLRST module into an SFP+ slot on a compatible switch or router while the device is powered on; the module is hot-swappable and does not require shutting down the host equipment. Connect LC-terminated single-mode fiber cables to the module’s duplex LC port, observing correct transmit/receive orientation. Monitor link status and optical parameters through the host device or the module’s DDM functionality to verify performance and signal quality.

Usage recommendations

Verify compatibility with your switch or router vendor and firmware before installation. Use single-mode fiber rated for 1310 nm operation and maintain proper cleanliness of LC connectors to reduce signal loss. For runs approaching the 10 km maximum distance, consider link budget and optical attenuation; use certified transceivers and cable to ensure reliable 10 GbE operation.