Supply connection for faucet with wall elbow TECE 16 mm x 1/2" 100/80 mm (740114)

TECE supply connection for faucet with wall elbow 16 mm x 1/2" and 100/80 mm offset is a pipe fitting designed to connect the building water supply to wall-mounted or concealed mixer taps. The product is suitable for installations where the water feed is routed inside the wall or finishes at a visible elbow; its compact design and standard 1/2" threaded outlet allow compatibility with most domestic faucets and mixers. The 100/80 mm offset gives installers flexibility to align the outlet with sanitary fixtures while maintaining a solid connection between the supply pipe and the mixer.

Advantages

This TECE supply connection combines a 16 mm inlet with a 1/2" threaded outlet to provide a reliable junction between copper or plastic water lines and standard mixer taps. It is designed for straightforward installation in both concealed and exposed fittings, reducing the need for additional adapters. The wall elbow maintains a consistent offset of 100/80 mm, helping ensure correct alignment and a neat finish at the wall. Materials and construction are intended for long-term water service, offering stable mechanical support for the fixture.

Suitable for

• Connecting wall-mounted bathroom faucets and showers to the water supply
• Kitchen mixer installations with a wall elbow outlet
• Concealed plumbing where a defined wall offset is required
• Replacement of existing wall elbow connections with standard 1/2" threaded fittings

Key specifications

• Inlet diameter: 16 mm suitable for common supply tubing
• Outlet thread: 1/2" compatible with standard mixer tap connections
• Wall offset: 100/80 mm design for consistent positioning from the finished wall
• Intended application: potable water supply connections for bathroom and kitchen fittings
• Mounting: wall elbow configuration for concealed or exposed installation

How to use

Install the supply connection by securing the 16 mm inlet to the building supply line according to the material of the pipe (soldering, press-fitting, or suitable compression fittings as appropriate). Position the wall elbow so the 100/80 mm offset aligns the 1/2" threaded outlet with the faucet inlet. Tighten the threaded connection to the mixer using appropriate sealing tape or a sealing washer if required by the mixer manufacturer. Test the installation by slowly opening the water supply and checking all joints for leaks before completing any wall finishes.

Usage recommendations

Use compatible sealing materials and follow local plumbing codes during installation. Select connection methods (solder, press, or compression) that match the pipe material and site conditions. When replacing an existing part, verify the offset and thread type to ensure a correct fit with the new mixer.