Angle adapter fitting TECE Nypel 20x1/2" brass (model 707520)

TECE Nypel angle adapter fitting in brass provides a compact angled transition between a 20 mm pipe and a 1/2" threaded fixture. Manufactured from brass, this angled adapter is intended for plumbing installations where a reliable, corrosion-resistant connection is needed. The component is suitable for use in water supply systems, radiator connections and general residential or commercial plumbing jobs requiring a secure 20 mm to 1/2" conversion at an angle.

Advantages

The brass construction ensures good corrosion resistance and mechanical strength for long-term use in potable water and heating systems. The angled design allows easy alignment of pipes and fixtures in confined spaces, reducing the need for additional fittings. Machined threads provide a precise fit to 1/2" threaded components while the 20 mm connection is compatible with standard copper or plastic tubing used in modern plumbing.

Suitable for

• Connecting a 20 mm water pipe to a 1/2" threaded valve or fixture at an angle
• Radiator inlet or outlet connections in domestic heating systems
• Compact plumbing runs in bathrooms, kitchens or service rooms where space is limited
• Repair or modification of existing water supply installations requiring an angled adapter

Key specifications

• Material: brass
• Pipe connection: 20 mm
• Threaded connection: 1/2"
• Type: angled adapter fitting
• Typical applications: potable water systems, heating/radiator connections

How to use

Prepare both the 20 mm pipe and the 1/2" threaded fixture by ensuring surfaces and threads are clean and free of debris. Insert or secure the 20 mm end according to the piping system in use (press-fit, solder, or compression depending on pipe type and local practice). Thread the 1/2" end into the mating component using appropriate sealant or tape on the thread if required by the installation standard. Tighten to the recommended torque for the connected components, taking care not to overstress the brass body.

Usage recommendations

Use compatible sealing materials and follow local plumbing codes. Verify material compatibility with the system fluid and operating temperatures. Inspect threaded connections for leaks after installation and re-tighten if necessary within manufacturer guidelines.