Networking Cable Tecline 1.0m Cat6 RJ-45 Red

The Tecline 1.0m Cat6 RJ-45 networking cable in red is a shielded Ethernet patch cable designed for short-distance wired connections. It uses Category 6 wiring and S/FTP (shielded foil twisted pair) construction to reduce electromagnetic interference and crosstalk, supporting high-speed data transfer between networking devices. The one-meter length is intended for linking routers, switches, modems, desktop computers, gaming consoles and other devices positioned close to each other. The red jacket provides visual distinction for cable management in home or office installations.

Advantages

S/FTP shielding around each twisted pair and an overall foil shield improves signal integrity in environments with potential interference from nearby electronics or power cables. Category 6 specification allows reliable transmission of Gigabit Ethernet and supports higher frequencies than lower category cables. The molded RJ-45 connectors provide a secure plug fit and strain relief at each end to reduce wear from bending or frequent reconnections. The 1.0 m length minimizes excess cable clutter while maintaining sufficient reach for common desk and rack setups.

Suitable for

• Connecting a PC or laptop to a router or switch at short distance
• Linking networked devices in a home office, media center or small server rack
• Temporary or permanent patching in structured cabling where visible color coding is needed
• High-bandwidth applications such as video streaming, online gaming and file transfers on Gigabit networks

Key specifications

• Cable category: Cat6
• Shielding: S/FTP (individual foil shields per pair + overall shield)
• Connector type: RJ-45 plug on both ends
• Length: 1.0 meter
• Jacket color: Red
• Supported speeds: up to Gigabit Ethernet (1000BASE-T) and frequencies up to 250 MHz
• Design: molded connectors with strain relief

How to use

Insert the RJ-45 connectors into the corresponding Ethernet ports on your devices until the latch clicks into place. Ensure both ends are fully seated to establish a reliable link. For best performance, avoid sharp bends and excessive twisting of the cable; maintain a gentle bend radius and route the cable away from high-voltage power lines or sources of strong electromagnetic interference. When disconnecting, depress the connector tab before pulling to avoid damaging the latch or connector.

Usage recommendations

Use the red Tecline Cat6 cable to simplify identification within a bundle of network leads or to mark critical links. For installations requiring longer runs, choose appropriate lengths and verify that connectors and patch panels are compatible with Cat6 wiring and shield termination practices. Inspect connectors periodically for wear and replace the cable if the shielding or jacket shows damage that could affect signal quality.