Networking Cable Tecline S/FTP Cat6A 15m

The Tecline S/FTP Cat6A 15m networking cable provides a 15-meter connection for high-speed Ethernet links. Designed for transmissions up to 10000 Mbit/s, this cable uses S/FTP (shielded foiled twisted pair with overall braid) construction to reduce electromagnetic interference and crosstalk. Fitted with RJ-45 connectors on both ends and finished in blue, it is intended for backbone runs, workstation connections and other network installations that require Cat6A performance over a moderate distance.

Advantages

S/FTP shielding and Cat6A specification deliver improved protection from external noise sources and internal pair-to-pair crosstalk, which supports stable 10 Gbps operation at 15 m. The molded RJ-45 connectors ensure reliable physical contacts and simple plug-and-play installation. The 15 m length covers typical office and home wiring scenarios without the need for intermediate patch panels, while the blue jacket aids cable identification in structured cabling systems.

Suitable for

• 10 Gigabit Ethernet links in small offices or home networks
• High-bandwidth applications such as NAS, media servers, and video streaming
• Patch runs between network switches, routers, and wall outlets
• Environments where reduced electromagnetic interference is required

Key specifications

• Cable category: Cat6A (augmented Category 6)
• Length: 15 meters
• Transfer rate support: up to 10000 Mbit/s (10 Gbps)
• Shielding: S/FTP (overall braid with individually foiled pairs)
• Connector type: RJ-45 on both ends, molded
• Color: blue jacket
• Typical use: Ethernet networking up to 10 Gigabit over copper

How to use

Connect one RJ-45 end to the network device (switch, router, network card or wall jack) and the other end to the target device. Ensure connectors are fully inserted until the latch clicks to establish a firm contact. Route the cable to avoid tight bends and keep it separated from power lines or strong electromagnetic sources where possible. For permanent installations, verify link speed and duplex settings on connected devices to confirm 10 Gbps operation.

Usage recommendations

For optimal performance, avoid sharp bends with bend radius smaller than four times the cable diameter, keep run lengths within the specified 15 m, and maintain separation from heavy power cabling. Test the link with appropriate network diagnostics after installation and replace connectors or cable if damage or intermittent connectivity is detected.