Network patch cable Telegärtner Cat5e F/UTP 1.5 m RJ-45 to RJ-45 Grey

Telegärtner Cat5e F/UTP 1.5 m patch cable with RJ-45 connectors on both ends is a screened copper cable designed for short Ethernet links in residential and office networks. Constructed to Category 5e performance, the cable uses foil shielding (F/UTP, also called FTP) to reduce electromagnetic interference from nearby cables and devices while maintaining standard 8P8C RJ-45 compatibility. With a 1.5 m length and a neutral grey jacket, it is suitable for tidy connections between switches, routers, patch panels and wall outlets where a reliable, low-latency copper link is required.

Advantages

The screened F/UTP design improves resistance to external interference compared with unshielded cables, supporting more stable data transmission in environments with potential electromagnetic noise. Category 5e specification ensures performance up to standard Gigabit Ethernet distances for short links; RJ-45 terminations on both ends provide universal compatibility with network equipment. The compact 1.5 m length reduces cable clutter and is convenient for patching in racks, behind desks, or between nearby devices.

Suitable for

• Connecting switches, routers and access points to patch panels or wall ports over short distances
• Desk-level connections between a PC or workstation and a nearby network outlet
• Patching within server cabinets and network racks where screened cable routing is preferred

When it may not be suitable

This 1.5 m Cat5e F/UTP cable is intended for short runs; it is not suitable when longer cable lengths are required or when higher performance categories (such as Cat6 or Cat6a) are needed for future-proofing or for guaranteed performance above Cat5e limits. In environments where grounding and shield termination are not properly implemented, the benefits of the foil shielding may be reduced.

Key specifications

• Category: Cat5e
• Shielding: F/UTP (foil screened pair with unshielded drain/overall)
• Length: 1.5 m
• Connectors: RJ-45 to RJ-45 (8P8C)
• Conductor type: stranded copper suitable for patch cables
• Color: Grey
• Typical applications: Ethernet data up to Cat5e performance

How to use

Plug one RJ-45 connector into the network port of the source device (for example a router, switch or patch panel) and the other connector into the destination device or wall socket. Ensure connectors click fully into place to confirm proper engagement. Route the cable to avoid tight bends and contact with sharp edges; keep it away from high-power mains cables where possible to minimize interference. For installations using cable shielding, verify that the patch panel or outlet supports shield termination and that any required grounding is carried out according to local practices.

What to consider before purchase

• Required length — 1.5 m is intended for short connections
• Performance class — Cat5e meets many current needs but is lower than Cat6/Cat6a
• Shielding needs — F/UTP offers foil screening; ensure your setup can terminate and ground shields if necessary
• Connector compatibility — standard RJ-45 (8P8C) plugs for common network devices

Usage recommendations

Use this Telegärtner Cat5e F/UTP 1.5 m cable for short, shielded patch connections in racks, at workstations, or between closely placed network devices. For installations that require full benefit from shielding, confirm proper shield termination and grounding at both ends.