Network cable Telegärtner Cat.7 MP8 FS 600 LSZH 5 m Black with 90° connector

Telegärtner Cat.7 MP8 FS 600 LSZH is a 5 m black network patch cable with a single 90° connector, built for Category 7 performance (600 MHz). The cable uses S/FTP wiring and is available with a PVC or low-smoke zero-halogen (LSZH) jacket and moulded strain relief boot, providing flexible, strain-relieved connections for racks, patch panels and equipment where a right-angle plug helps with tight routing.

Advantages

The cable offers 360-degree shielded plug coverage on shielded variants, flexible construction and a moulded strain relief boot for improved durability and reduced stress on terminations. Termination follows the EIA/TIA 568 wiring sequence and the product meets ISO/IEC 11801 edition 2 Category 7 specifications for up to 600 MHz operation.

Suitable for

• High-speed Ethernet links requiring Cat7 performance up to 600 MHz
• Connections in racks and patch panels
• Equipment connections where a 90° connector eases cable routing in confined spaces

When it may not be suitable

This Cat7 S/FTP cable may be unnecessary for installations that only require lower-category cables such as Cat5e or Cat6, where the higher performance and shielding are not needed. It may also be inappropriate when a straight connector is required instead of a 90° plug or when in-wall installations mandate a different jacket material than LSZH or PVC per local regulations.

Key specifications

• Cable category: Category 7 (600 MHz) according to ISO/IEC 11801 edition 2
• Wiring: S/FTP, 1:1 termination (EIA/TIA 568 sequence)
• Length: 5 m
• Connector configuration: one 90° plug
• Plug shielding: 360° surround on shielded plug types
• Jacket and boot materials: PVC or LSZH (Low Smoke Zero Halogen)
• Colour: Black

How to use

Insert the 90° MP8 plug into the device or patch panel port until it clicks, ensuring the right-angle orientation matches the intended cable routing. Route the cable to avoid sharp bends and excessive tension; the moulded strain relief boot reduces stress at the plug but do not exceed recommended bend radius for Cat7 cables. Follow standard network testing procedures after installation to verify signal integrity and correct termination.

What to consider before purchase

• Required cable category and performance: verify that Cat7 (600 MHz) is necessary for your network
• Connector orientation: confirm that a 90° plug fits the device and space constraints
• Jacket material: choose LSZH for low-smoke environments or PVC where LSZH is not required
• Compatibility with existing patch panels and equipment ports

Usage recommendations

For best results use this Telegärtner Cat.7 cable for short runs between patch panels, switches and equipment where shielding and a right-angle plug improve routing; always avoid tight bends and perform post-installation testing to ensure link performance.