Networking cable Telegärtner MP8 250-15.0 Cat6 U/UTP RJ-45 to RJ-45 Grey 15 m

Telegärtner MP8 250-15.0 is a 15 m Cat6 U/UTP patch cable with RJ-45 connectors on both ends. It is designed for Ethernet networking and structured cabling, providing Cat6 performance for LAN connections, patch panels and device interconnection in homes, offices and server rooms. The cable is grey and features moulded strain relief boots with options for 90°, 180° or 270° angled boots as well as very short boot variants.

Advantages

The cable follows the EIA/TIA 568B pin assignment and offers flexible, strain-relieved construction with PVC or LSZH jacket and boot options. For shielded cable types, the plug provides 360-degree surround shielding. Moulded boots include latch protection and are available in multiple colours including grey, green, red, blue, yellow, black, white and purple.

Suitable for

• Ethernet patching between switches, patch panels and devices
• Home and office LAN cabling
• Server room device interconnection and short horizontal runs

When it may not be suitable

This U/UTP (unshielded) Cat6 cable is not intended for environments that require full shielding against electromagnetic interference unless you select a shielded cable type. It is also not designed for permanent outdoor burial without additional protective conduits or UV-resistant outer sheathing.

Key specifications

• Cable category: Cat6 U/UTP (UTP)
• Length: 15 m
• Connectors: RJ-45 (male) on both ends
• Pin assignment: EIA/TIA 568B
• Boot types: moulded boots with 90° / 180° / 270° angled options and very short boot variant
• Jacket / boot material: PVC or LSZH (Low Smoke, Zero Halogen)
• Available colours: grey, green, red, blue, yellow, black, white, purple
• Strain relief: moulded, flexible and strain-relieved design
• Shielding (for shielded cable variants): 360° surround plug shielding

How to use

Connect RJ-45 plug to the Ethernet ports of your devices, switches or patch panels following standard network wiring practices. Use the appropriate angled boot variant where space is limited to avoid bending the cable near the connector. Ensure connectors are fully seated and the latch is engaged; route the cable to minimise sharp bends and mechanical strain.

What to consider before purchase

• Confirm that Cat6 U/UTP (unshielded) meets your EMI and performance requirements; choose a shielded variant if needed.
• Check required cable length and whether angled or very short boot variants are preferable for tight spaces.
• Decide on jacket material (PVC vs LSZH) based on fire-safety and installation environment requirements.
• Select the cable colour if colour-coding is needed for your installation.

Usage recommendations

For reliable Cat6 performance, avoid tight bends and excessive pulling force during installation, keep patch cable runs within standard horizontal cabling lengths where applicable, and choose LSZH jackets in confined or public spaces where low smoke and halogen-free properties are required.