Fibre optic cable Telegärtner L00892A0075 3 m SC LC Violet

The Telegärtner L00892A0075 3 m SC LC Violet is an OM4 multimode fibre optic patch cable designed for high-speed data transmission in structured networks. With a 50 µm core diameter and SC to LC terminations, the cable provides reliable full-duplex connectivity over short to medium distances in data centres, telecom racks and enterprise network environments. The violet jacket identifies the OM4 grade and supports enhanced bandwidth for 10G and higher multimode applications.

Advantages

The cable combines an SC connector on one end and an LC connector on the other to offer flexible connectivity between devices with different port types. OM4 multimode fibre provides reduced modal dispersion compared with lower multimode grades, enabling higher throughput and extended reach for standardized short-range multimode links. The 3 m length balances convenience and tidy cable management in patch panels and rack-mounted equipment. A violet outer jacket makes identification and segregation of OM4 links straightforward in dense cabling environments.

Suitable for

• 10 Gigabit Ethernet links within data centres and telecom rooms
• Interconnection between optical transceivers and patch panels with SC and LC ports
• Structured cabling in enterprise networks supporting high-bandwidth multimode links
• Short to medium reach multimode applications such as SAN and campus networks

Key specifications

• Fibre type: OM4 multimode (50 µm core)
• Connector types: SC connector to LC connector
• Cable length: 3 metres
• Link mode: Full duplex
• Jacket colour: Violet (OM4 identification)
• Typical applications: Multimode high-speed links, patching and interconnect

How to use

Identify the appropriate SC and LC ports on your transceivers, patch panels or networking equipment before connecting. Insert the SC connector into the matching SC receptacle until it clicks, and insert the LC connector into the LC port ensuring proper alignment. Route the cable to avoid sharp bends and mechanical stress; maintain minimum bend radius recommended for multimode fibre to preserve optical performance. For full-duplex operation, ensure transmit and receive channels are connected to their corresponding ports on each end.

Usage recommendations

Handle the fibre cable by the connector bodies and avoid touching the fibre end faces. Use dust caps when connectors are not in use and inspect or clean end faces with appropriate fibre cleaning tools if signal loss is observed. Store and route the 3 m cable in trays or behind patch panels to reduce excess strain and maintain consistent identification by keeping the violet jacket visible for OM4 links.