Wire connector Televes RJ45 male pass-through UTP Category 6, white, 11×21 mm, pack of 50

Televes 209906 RJ45 male pass-through connector for UTP Cat 6 data cables in white. This connector is designed to terminate Cat 6 (and lower) UTP cables by allowing the individual conductors to pass fully through the plug before crimping, simplifying alignment and providing a visible check of pair order. The product is supplied in a professional plastic box and is intended for use where reliable Ethernet terminations are required.

Advantages

The pass-through design ensures conductors extend beyond the plug end so excess can be trimmed for consistent length, reducing termination errors and the risk of mis-seating. Fitting pairs fully to the end of the connector keeps the cable twist close to the contacts, helping to maintain near-end crosstalk (NEXT) performance. Visible wire ordering at the plug exit makes verification straightforward and increases assembly reliability.

Suitable for

• Terminating Cat 6 and Cat 5e UTP data cables
• On-site Ethernet cable assembly and repairs
• Small- and medium-scale structured cabling installations
• Network patch leads and bespoke cable lengths

When it may not be suitable

This connector is intended for unshielded (UTP) Cat 6 and lower cables; it is not suitable for shielded (STP/FTP) cable types or for Cat 6A/Class EA applications that require enhanced mechanical or shielding features. Installation requires a crimping tool designed for pass-through RJ45 plugs, so it may not be appropriate where such tools are unavailable.

Key specifications

• Connector type: RJ45 male, straight
• Cable compatibility: UTP Cat 6 and backward compatible with Cat 5e/Cat 5
• Contacts: 50 µm gold plating
• Housing material: polyvinyl chloride (PVC)
• Colour: white
• Pack quantity: 50 pieces
• Recommended tool: crimping tool for pass-through RJ45 connectors
• Typical dimensions: width ~11 mm, height ~21 mm

How to use

Strip the cable jacket to expose the four twisted pairs, untwist and arrange the conductors in the chosen TIA wiring order. Insert the conductors fully through the pass-through connector until they protrude from the front, visually verify pair order, and trim the excess flush with the plug face. Place the connector in a compatible crimping tool and crimp according to the tool manufacturer's instructions to secure the contacts and housing.

What to consider before purchase

• Ensure you are using unshielded UTP cable (not STP/FTP)
• Confirm Cat 6 is suitable for your network speed and distance requirements
• Have a pass-through RJ45 crimping tool available
• Plan for the required pack quantity (50 pieces per pack)

Usage recommendations

Use these pass-through RJ45 connectors with a dedicated pass-through crimping tool, keep cable untwist to a minimum near contacts, and perform a continuity and wiring-order test after termination to verify correct connections and acceptable link performance.