Electric Faucet TERMOMAX TX42TFD 3600W instant water heater tap

TERMOMAX TX42TFD 3600W instant water heater tap is an electric faucet with an integrated instant heating element designed to supply hot water directly at the sink. Combining standard mixer functionality with on-demand electric heating, this countertop-mounted unit provides hot and cold water and delivers tempered water in seconds with a temperature range approximately 30–60°C. The device is suitable for point-of-use installations in kitchens, bathrooms, small offices or utility areas where immediate hot water is required, and it operates at nominal power between 3000 and 3600 W on 220–240 V, 50–60 Hz.

Advantages

The built-in 3600 W heater enables fast heating and reduces waiting time for warm water; energy is used only when the tap is open, which can improve efficiency compared with centralized systems. The mixer supports operation with low water pressure (0.04 MPa–0.5 MPa) and includes an LED display for clear temperature or status indication. Designed for countertop mounting, the unit has IPX4 protection for splash resistance and a flexible nozzle for convenient water direction. Installation on circuits with residual current protection and use in rooms with ambient temperature above 0°C are required for safe operation.

Suitable for

• Kitchen sinks in apartments or cottages requiring immediate hot water
• Bathroom basins where point-of-use heating is preferred
• Small offices, workshops or utility rooms without central hot water
• Temporary or secondary installations such as guest flats and RV-style setups

Key specifications

• Rated power: 3000–3600 W
• Supply voltage: 220–240 V, 50–60 Hz
• Operating water temperature range: approximately 30–60 °C
• Minimum and maximum working water pressure: 0.04 MPa–0.5 MPa
• Protection class: IPX4 (splash resistant)
• Mounting type: countertop
• Mixing: hot and cold water mixer function
• Display: LED status/temperature indicator
• Nozzle: flexible spout

How to use

Connect the TERMOMAX TX42TFD to a suitable 220–240 V power supply with residual current protection and to the cold and hot water lines according to the installation manual. Mount the unit on the countertop and verify water connections and sealing. When the tap is opened, the heating element activates and supplies tempered water; adjust the mixer handle to obtain the desired water temperature within the device’s operating range. Monitor the LED display for temperature or status information and close the tap when heating is no longer required.

Usage recommendations

Install and service the appliance according to local electrical and plumbing codes. Use the unit only in rooms with ambient temperature above 0°C. Do not operate the heater without adequate water flow; ensure incoming water pressure is within the specified 0.04 MPa–0.5 MPa range. Regularly inspect seals and connections and follow manufacturer guidance for maintenance to preserve performance and safety.