Submersible water pump TOYA Flo 79773, 750 W, 230 V, IPX8, 10 m cable

The TOYA Flo 79773 submersible water pump is a compact unit with a 750 W motor designed for 230 V / 50 Hz mains. It is intended for continuous removal and circulation of water in flooded basements, wells, construction sites and domestic locations. The pump features IPX8 protection for full immersion, an impact-resistant plastic housing and a 10 m rubberized power cable. With automatic level control via an integrated float switch and multiple hose adapters, the unit supports a range of dewatering and water-transfer tasks while remaining lightweight at 3.8 kg.

Advantages

The pump combines a high-power 750 W motor with a corrosion-resistant plastic housing to provide reliable operation for clean and moderately polluted water. Built-in IPX8 protection allows safe continuous submersion, while the included automatic float switch enables hands-off start/stop according to water level. Multiple adapter sizes for outlet connection increase compatibility with common hoses and fittings. The 10 m rubberized cable and compact dimensions simplify placement and retrieval in wells, basements or pits.

Suitable for

• Dewatering flooded basements and cellars
• Emptying swimming pools, ponds and rain tanks
• Temporary water removal on construction sites
• Water circulation and aeration in domestic ponds and tanks
• Use at small farms, allotments and summer houses

Key specifications

• Power: 750 W
• Supply voltage: 230 V / 50 Hz
• Protection class: IPX8 (suitable for full immersion)
• Maximum water temperature: 35 °C
• Housing: impact-resistant plastic, corrosion resistant
• Automatic float switch for level control
• Cable: 10 m rubberized power cable
• Outlet connection adapters included: 1", 1-1/4", 1-1/2"
• Overall dimensions (diameter x height): 160 x 340 mm
• Minimum shaft cross-section for installation: 40 x 40 x 50 cm
• Weight: 3.8 kg

How to use

Place the pump on a stable surface within the flooded area or lower it into the well or tank, ensuring the minimum shaft cross-section is respected for correct operation. Connect the appropriate outlet adapter and attach a discharge hose of suitable diameter. Plug the power cord into a properly grounded 230 V outlet. The integrated float switch will start and stop the pump automatically as water level changes; monitor the pump during the first use and ensure the discharge path is clear. Avoid running the pump dry and do not exceed the specified maximum water temperature.

Usage recommendations

For extended service life, remove debris from the intake area before operation, periodically inspect the housing and cable for damage, and store the pump in a dry place when not in use. Use the matching adapter size and secure hose connections to prevent leaks. If the pumped water contains large solids or abrasive materials, consider a purpose-built solids-handling pump.