Fiber Patch Cable LC/LC Tripp Lite N820-01M-OM4 — Duplex Multimode 50/125 OM4 LSZH, 10Gb/100Gb, 1 m

Tripp Lite N820-01M-OM4 is a 1 m duplex multimode fiber patch cable with LC to LC connectors. It uses 50/125 µm OM4 multimode fiber with a low-smoke, zero-halogen (LSZH) jacket and supports high-speed links including 10Gb and 100Gb Ethernet. The cable is intended for data center, server, switch and SAN connections where high bandwidth and low-smoke cabling are required.

Advantages

The OM4 multimode fiber provides increased bandwidth and extended reach for 40/100 GbE links compared with lower-grade multimode fibers. LC/LC duplex connectors offer a compact, widely compatible termination for modern transceivers. The LSZH jacket reduces toxic fumes and smoke in the event of a fire, making the cable suitable for use in enclosed spaces and cable trays. The cable is compliant with common industry standards for multimode performance and interoperability.

Suitable for

• Short-range high-speed Ethernet connections (10Gb/40Gb/100Gb) within racks and between network equipment in data centers
• Fibre Channel SAN links and server-to-switch connections
• Environments requiring low-smoke, halogen-free cabling such as offices, comms rooms and public buildings

When it may not be suitable

This OM4 multimode cable is not appropriate for long-haul single-mode fiber applications or metropolitan/long-distance links that require single-mode fiber. It may also be unnecessary for simple, low-speed home networking where multimode performance and LSZH jacketing are not required.

Key specifications

• Cable type: Duplex multimode fiber
• Core/cladding: 50/125 µm
• OM rating: OM4
• Connectors: LC to LC duplex
• Length: 1 meter (approx. 3.3 ft)
• Jacket: Low-smoke, zero-halogen (LSZH)
• Supported speeds: 10Gb and 100Gb Ethernet; supports 40/100Gb up to OM4 reach limits
• Typical wavelength: 850 nm (multimode VCSEL/LED sources)

How to use

Install the LC/LC duplex cable by aligning and inserting each LC connector into the corresponding LC port on transceivers, switches or servers until the latch engages. Use one strand for transmit and the other for receive according to device labeling. Route the cable to avoid sharp bends and mechanical stress; maintain recommended bend radius for multimode fiber. Verify link status and performance with network diagnostics after installation.

What to consider before purchase

• Confirm that your equipment uses LC duplex connectors and supports multimode transceivers
• Verify required link speed and distance to ensure OM4 performance meets your needs
• Check whether LSZH jacket is required by building regulations or site policy

Usage recommendations

For reliable 10Gb/40Gb/100Gb operation, pair this OM4 LC/LC cable with compatible multimode transceivers and maintain appropriate connector cleanliness and bend radius. Store and handle the cable to prevent contamination on connector endfaces and avoid excessive pulling force.