PoE Injector UBIQUITI UACC-PoE+-2.5G 43018807 — PoE+ 30W, 2.5GbE Ethernet

UBIQUITI UACC-PoE+-2.5G is a PoE+ injector designed to deliver up to 30 W of power over Ethernet while supporting 2.5 GbE data rates. The device provides a straightforward way to power compatible access points, IP cameras, switches and other network endpoints that require both elevated power and multi-gigabit connectivity. Compact and intended for inline use with existing cabling, this injector enables higher-than-1GbE throughput without modifying endpoint hardware or cabling topology.

Advantages

This PoE+ injector combines 30 W power delivery with 2.5 GbE data throughput in a single inline unit, reducing the need for separate power supplies. It supports Power over Ethernet standards suitable for many enterprise and prosumer devices, and its multi-gigabit Ethernet capability allows smoother performance for bandwidth-sensitive applications such as high-resolution video and high-density wireless deployments. The compact form factor simplifies installation in locations where switch-based PoE is not available.

Suitable for

• Powering PoE+ capable access points that require more than 1 GbE bandwidth
• Providing inline power to IP cameras with higher power consumption and multi-gigabit uplinks
• Adding PoE and 2.5 GbE connectivity to switches or devices located away from a PoE-capable switch
• Upgrading specific network links to multi-gig speeds without replacing cabling or switches

When it may not be suitable

This injector is not intended to replace a multi-port PoE switch where centralized power management, aggregated port density or switch-level features (VLAN, QoS management) are required. For devices that only need 1 GbE connectivity or consume less than the standard PoE power provided by simpler injectors, the multi-gigabit capability may be unnecessary. Also, ensure the powered device supports PoE+ power class to avoid compatibility issues.

Key specifications

• PoE power output: up to 30 W
• Ethernet data rate: 2.5 Gigabit Ethernet
• Interface: single Ethernet data+power port (inline injector configuration)
• Power delivery standard: PoE+ compatible output
• Physical form: compact inline injector suitable for wall or desk placement

How to use

Connect the injector’s data input to your network switch or router using a standard Ethernet cable, then connect the injector’s output to the PoE-capable device you wish to power. Provide AC power to the injector via its supplied power cord. The injector will pass both data and power to the connected endpoint at up to 2.5 GbE and deliver up to 30 W of PoE+ power. Verify device LED indicators and the powered device’s status to confirm successful power and link negotiation.

What to consider before purchase

• Confirm the endpoint supports PoE+ and requires up to 30 W of power.
• Ensure your cabling and connected switch support multi-gigabit Ethernet or are compatible with 2.5 GbE operation.
• Check whether a single-port injector meets deployment needs vs a multi-port PoE switch for centralized management.

Usage recommendations

Use the injector for individual devices or small numbers of endpoints where PoE+ and 2.5 GbE are required. For larger installations, consider combining injectors with managed switches or deploying multi-port PoE switches to centralize power and management.