Managed L2 Gigabit Ethernet PoE Switch Ubiquiti Ultra 210W USW-ULTRA-210W, 10/100/1000 Mbps, white

UBIQUITI Ultra 210W (USW-ULTRA-210W) is a managed Layer 2 Gigabit Ethernet switch in a white enclosure that provides wired connectivity and Power over Ethernet (PoE) for network devices. It features eight Gigabit RJ-45 ports, of which seven support PoE with a per-port capacity of 30 W and a total power budget of 210 W. The switch is intended for centrally managed small office and branch deployments where PoE-powered devices and basic traffic control are required.

Advantages

The switch supports managed Layer 2 functions and offers PoE distribution across seven ports, enabling deployment of cameras, access points and VoIP phones without separate power supplies. With a switching capacity of 16 Gbit/s, forwarding performance of 11.904 Mpps and Jumbo Frame support, it handles typical small-to-medium wired traffic reliably. Compliance with CE, FCC and IC certifications ensures regulatory conformity.

Suitable for

• Small office networks
• Branch locations and remote sites
• PoE wireless access point deployments
• IP camera and surveillance systems
• VoIP phone installations

Key specifications

• Ports: 8 × Gigabit Ethernet (RJ-45)
• PoE ports: 7 ports with PoE support, up to 30 W per port
• Total PoE budget: 210 W
• Switch type: Managed Layer 2 Ethernet switch
• Switching capacity: 16 Gbit/s
• Forwarding performance: 11.904 Mpps
• Jumbo Frames: Supported
• Port mirroring: Supported
• Dimensions (W × D × H): 203 × 76 × 33 mm
• Weight: 320 g
• Maximum power consumption: 8 W
• Certifications: CE, FCC, IC

How to use

Install the switch on a flat surface or in a rack-compatible area per site requirements, connect Ethernet cables to the RJ-45 ports and attach PoE-powered devices to the PoE-capable ports. Connect the switch to the network management controller or configure it through the device's management interface to set VLANs, port mirroring and other Layer 2 features. Ensure the combined power draw of connected PoE devices does not exceed the 210 W budget and verify per-port power allocation when connecting high-power devices.

Usage recommendations

When deploying multiple high-power PoE devices, calculate total power consumption before installation and distribute loads across PoE ports to avoid exceeding the 210 W budget; keep firmware updated and use the management features to segment traffic and monitor port status for stable operation.