Unidelta elbow PE GZ 32 mm x 1" fitting

The Unidelta elbow PE GZ 32 mm x 1" fitting is an angled connector designed to join 32 mm polyethylene (PE) tubing with a 1-inch male threaded fixture. It creates a secure transition between flexible PE pipework and metal-threaded components, providing a compact directional change where a threaded connection is required. The fitting is intended for use in potable and non-potable water distribution, irrigation systems and general plumbing installations where a reliable joint between polymer pipe and a threaded outlet or valve is needed.

Advantages

This elbow fitting offers a stable mechanical connection between PE piping and 1" threaded components, enabling easy assembly and disassembly of threaded devices. Its angled design reduces the need for additional adapters when changing direction in piping runs. The connector is compatible with standard 32 mm PE tubing and standard 1" threads, providing versatility in mixed-material systems and simplifying installation in confined spaces.

Suitable for

• Potable water distribution lines using 32 mm PE tubing
• Irrigation and landscaping systems with threaded sprinklers or valves
• Plumbing installations requiring transition from PE pipe to metal-threaded fittings
• Repairs or retrofits where a change of direction and threaded connection are needed

Key specifications

• Connection A: 32 mm polyethylene (PE) pipe
• Connection B: 1" male threaded outlet
• Type: 90° elbow (angled) fitting
• Material compatibility: polyethylene to metal-threaded components
• Application: water distribution, irrigation, plumbing

How to use

Prepare the 32 mm PE pipe by cutting squarely and removing burrs to ensure a clean fit. Insert the PE pipe into the fitting according to the manufacturer’s recommended insertion depth and secure it using the appropriate compression, electrofusion, or mechanical method specified for the fitting type. Screw the 1" male-threaded component into the threaded end, applying suitable thread sealant or tape if required by the installation. Tighten to the torque recommended for the threaded component to avoid over-stressing the connection. After assembly, perform a pressure or leak test in line with applicable standards and local regulations.

Usage recommendations

Use compatible 32 mm PE tubing and verify thread standards on the mating component prior to assembly. Do not overtighten threaded connections; follow torque guidelines for the specific mating material. Ensure the installation is protected from excessive mechanical loads and UV exposure if installed outdoors without proper shielding.