Unidelta plumbing elbow 25 mm x 1/2" PE to female thread, model 602624

The Unidelta plumbing elbow 25 mm x 1/2" PE to female thread, model 602624, is a compact 90° connector designed to join 25 mm polyethylene (PE) pipe to a 1/2" female threaded fitting. Intended for use in water distribution and fluid systems, this elbow provides a secure transition between flexible PE tubing and threaded fixtures while changing the flow direction. The construction focuses on reliable sealing and stable mechanical connection for residential and light commercial plumbing and irrigation applications.

Advantages

This elbow enables an efficient angular transition from 25 mm PE pipe to standard 1/2" female threads without requiring additional adaptors. Its design reduces installation space due to the compact 90° profile and simplifies routing of pipework where directional change is needed. The connector is suitable for potable water and general fluid conveyance when used with compatible system components, and it offers ease of assembly and serviceability compared with permanent solvent-weld or fused joints.

Suitable for

• Residential water supply lines connecting PE piping to threaded fixtures
• Irrigation systems where PE mainlines must connect to threaded valves or emitters
• Light commercial fluid distribution and plumbing repairs or retrofits

Key specifications

• Connection A: 25 mm polyethylene (PE) pipe
• Connection B: 1/2" female thread
• Elbow angle: 90°
• Application: water and general fluid distribution
• Typical installation environment: residential and light commercial

How to use

Prepare the 25 mm PE pipe by cutting squarely and removing any burrs. Insert the PE pipe into the elbow's socket until it seats fully according to the manufacturer's insertion depth. Tighten the 1/2" male threaded counterpart into the female thread using appropriate thread sealant or tape if required by the system specifications. Verify alignment at 90° and secure any supporting brackets or clamps to prevent strain on the joint. After assembly, perform a pressure test or visual inspection for leaks before putting the section into regular service.

Usage recommendations

Use compatible PE pipe and thread materials; follow local plumbing codes for sealing and pressure testing. Avoid excessive torque on threaded connections and support piping near the elbow to limit mechanical stress. Replace seals or apply approved thread sealant when reassembling to maintain leak-free performance.