Unidelta reducer tee PE female thread 32 mm x 1" x 32 mm (603632)

Unidelta reducer tee PE female thread 32 mm x 1" x 32 mm is a polyethylene (PE) fitting designed to connect two 32 mm PE pipes while providing a 1" internal threaded outlet. The fitting integrates a smooth PE spigot on both run ends and a female BSP-style thread in the branch, combining the chemical resistance and flexibility of PE with a threaded connection suitable for attaching valves, taps or other threaded fittings. It is intended for use in low-pressure water distribution and irrigation systems where a threaded branch is required.

Advantages

This reducer tee offers corrosion-resistant polyethylene construction that resists scaling and chemical attack, ensuring long service life in contact with potable and non-potable water. The integrated female thread allows direct connection of standard 1" threaded components without additional adapters, reducing installation complexity. Lightweight and dimensionally stable, the fitting simplifies handling and alignment during assembly and provides leak-tight performance when installed according to recommended practices.

Suitable for

• Irrigation systems for gardens, lawns and agricultural plots
• Low-pressure water distribution and supply lines
• Connections to valves, taps or metering devices requiring a 1" female thread
• Utility and maintenance piping where a threaded branch is needed

Key specifications

• Material: polyethylene (PE)
• Connection type: two spigot ends for 32 mm PE pipe and one internal 1" female threaded branch
• Run diameter: 32 mm
• Branch thread size: 1" internal (female)
• Application: low-pressure water, irrigation and distribution systems

How to use

Prepare the 32 mm PE pipes by cutting squarely and deburring the ends. Ensure pipe outer diameter and wall thickness are compatible with the fitting and clean the mating surfaces. Insert the PE pipe ends into the spigot sockets to the proper insertion depth specified for the piping system, using appropriate joining methods for PE (such as electrofusion or mechanical compression couplers) where required by the system design. For the 1" female thread, apply a suitable thread sealant or PTFE tape to the male thread of the mating component and tighten to the manufacturer’s recommended torque to achieve a leak-tight joint. Follow local codes and the piping system manufacturer’s instructions during installation.

Usage recommendations

Use this reducer tee in systems operating within the pressure and temperature limits of polyethylene piping. Avoid exposing threaded metal fittings to dissimilar metals without appropriate dielectric isolation. For best results, perform pressure testing after installation and inspect threaded connections periodically for signs of leakage.