Acrylic Airbrush Paint Set VALLEJO Model Air 71.202 AFV MERDC Camo Colors (8 x 18 ml)

VALLEJO Model Air 71.202 AFV MERDC Camo Colors (8 x 18 ml) is an acrylic airbrush paint set formulated for scale military modelling and MERDC (Mobility Equipment Research and Development Center) camouflage schemes. The kit includes eight 18 ml bottles of low-viscosity, highly pigmented acrylics intended for use with airbrushes; the paints are designed to flow smoothly, dry quickly and adhere well to primed plastic, resin and metal model surfaces. This set targets model builders who need accurate vehicle camouflage tones and consistent spray performance for AFV (armoured fighting vehicle) detailing and finishing.

Advantages

The paints are airbrush-ready with a formulation that provides low viscosity and stable pigmentation, enabling uniform coverage and fine control of spray patterns. Fast drying time reduces waiting between layers and simplifies masking and weathering workflows. Good adhesion to primed substrates and compatibility with common modelling primers and varnishes allow for layered techniques, washes and drybrushing without premature lifting.

Suitable for

• Scale AFV modelling and military vehicle kits
• MERDC camouflage schemes and historical colour matching
• Basecoats, pre-shading and layering with an airbrush
• Model surfaces including primed plastic, resin and metal

When it may not be suitable

This acrylic airbrush set is optimized for spray application; it may not perform as intended when applied undiluted with brush techniques for large opaque coverage. Very porous or unprimed surfaces can reduce adhesion and increase paint absorption, so priming is recommended. For extremely glossy factory finishes or specialised clearcoats, additional compatibility tests with your chosen varnish or lacquer are advised.

Key specifications

• Finish: Matte to satin depending on dilution and topcoat
• Volume per bottle: 18 ml; total volume: 144 ml
• Colour system: AFV MERDC camouflage palette (8 distinct shades)
• Base: Water-based acrylic
• Viscosity: Low; formulated for airbrush use
• Drying: Fast-drying under typical modelling conditions
• Compatibility: Designed for use over primed plastic, resin and metal surfaces

How to use

Shake each bottle thoroughly before use to ensure uniform pigment suspension. For airbrush application, thin the paint as required with the manufacturer’s recommended thinner or water to achieve the desired spray viscosity; start with small dilutions and test on a scrap surface. Apply in thin, even passes, allowing brief drying between light coats to build an even coverage. Use masking techniques and slow build-up for crisp camouflage patterns; finish with an appropriate varnish to secure decals and weathering effects.

What to consider before purchase

• Requires an airbrush for optimal performance; brush application may need additional thinning and multiple coats
• Primer and appropriate thinners/topcoats are recommended but not included
• Colours are intended for MERDC/AFV modelling—verify tone suitability for your specific reference photos or standards

Usage recommendations

Use light, controlled passes with the airbrush and let layers dry between coats to avoid pooling. Test colours on a spare part or card before applying to the model. Store bottles upright in a cool, dry place and reseal caps after use to maintain paint quality.