S/FTP Patch Cord Cat.6 VALUE 1.5m

The VALUE S/FTP Patch Cord Cat.6 1.5m is a shielded Ethernet patch cable with RJ-45 connectors on both ends, intended for use as a patch lead in wiring cabinets or as a direct connection between network devices. The cable is flexible for tight bends, built from eight stranded copper conductors with a braided shield and an overall impedance of 100 ohms. The jacket is LSOH (Low Smoke Zero Halogen), which limits smoke emission and contains no halogens when exposed to fire. The cable and connector combination has been tested in a 100 m channel and complies with Class E (Cat6) specifications.

Advantages

Shielded S/FTP construction provides enhanced protection against electromagnetic and radio-frequency interference. RJ-45 connectors wired 1:1 according to EIA/TIA-568 ensure standard compatibility and straightforward installation. The stranded copper conductors and flexible jacket make the cable suitable for installations that require narrow bending radii. LSOH jacketing reduces hazardous emissions in case of high heat or fire, making it suitable for indoor structured cabling environments.

Suitable for

• Patching in wiring cabinets and network racks
• Direct device-to-device connections (switch to server, PC to switch)
• Indoor structured cabling where low smoke and halogen-free materials are required
• Short horizontal connections and small office/home office setups

Key specifications

• Product: S/FTP Patch Cord Cat.6 VALUE
• Length: 1.5 m
• Connectors: RJ-45 — both ends, 1:1 wiring per EIA/TIA-568
• Cable construction: 8 stranded copper conductors, braided shield (S/FTP)
• Impedance: 100 Ω
• Jacket: LSOH (Low Smoke Zero Halogen)
• Brand / MPN / EAN: VALUE / 21.99.0713 / 7611990113675
• Performance: Tested in a 100 m channel, compliant with Class E (Cat6) specifications

How to use

Connect the RJ-45 plug at each end to the corresponding ports of the devices you want to link (for example switch, patch panel, router or PC). Ensure connectors click into place and that cable routing avoids sharp edges and excessive tension. Use the 1.5 m length for short patching runs inside racks, cabinets or between devices on a desk. For structured cabling exceeding recommended channel lengths, combine with appropriate solid-core horizontal cabling components.

Usage recommendations

For a structured cabling system, pair this patch cord with VALUE Cat.6 S/FTP solid cable and shielded Cat.6 components (wall jacks, patch panels) to maintain shielding continuity. Avoid repeated sharp bends and mechanical strain; keep the bend radius larger than the cable diameter. Use in indoor environments where LSOH properties are required.