S/FTP Patch Cord Cat.6 VALUE 5m Halogen-free Green

S/FTP Patch Cord Cat.6 VALUE 5m Halogen-free Green is a 5-meter shielded twisted pair (S/FTP) patch cable with RJ-45 connectors on both ends. It is designed for use as a patch cable in wiring cabinets or as a direct connection between devices. The cord uses eight stranded copper conductors with a braided overall shield, has a characteristic impedance of 100 Ohm and an LSOH (Low Smoke Zero Halogen) jacket that limits smoke and emits no halogens when exposed to heat. Contact wiring follows the 1:1 EIA/TIA 568 standard. The cable and connector combination has been laboratory tested in a 100 m channel and meets Class E (Cat.6) specifications.

Advantages

This VALUE S/FTP Cat.6 patch cord provides shielded twisted pairs to reduce electromagnetic interference and improve signal integrity. Its stranded copper conductors and flexible LSOH jacket allow for tight bends and easy routing in crowded or narrow installations. The halogen-free LSOH jacket increases safety in enclosed spaces by reducing smoke and toxic gas emissions in case of fire. The cable is factory-terminated with RJ-45 plugs wired 1:1 for straightforward deployment.

Suitable for

• Patching in wiring cabinets and patch panels
• Direct device-to-device Ethernet connections
• Installation routes requiring flexible cables and tight bends
• Environments where low smoke and halogen-free materials are required

Key specifications

• Category: Cat.6 (Class E)
• Cable type: S/FTP (shielded overall with individually shielded pairs)
• Length: 5 m
• Conductors: 8 stranded copper wires
• Impedance: 100 Ohm
• Connector: RJ-45 on both ends, wired 1:1 (EIA/TIA 568)
• Jacket: LSOH (Low Smoke Zero Halogen)
• Colour: Green
• Brand / MPN: VALUE / 21.99.1263
• EAN: 7611990114153

How to use

Connect one RJ-45 plug to the network port of a switch, patch panel or device and the other plug to the corresponding port at the other end. Ensure connectors are fully inserted and latched to secure the connection. Route the cable avoiding sharp edges and excessive tensile stress; its flexible stranded construction permits routing through confined spaces and around bends typical for patching applications. For structured cabling longer channel runs, combine this patch cord with appropriate solid-core S/FTP cabling and compatible shielded components.

Usage recommendations

For a complete structured cabling channel, use this VALUE S/FTP patch cord together with solid ROLINE Cat.6 S/FTP LSOH cable and shielded Cat.6 patch panels and wall jacks. Our laboratory testing used a full 100 m channel and confirmed compliance with Class E (Cat.6) specifications.