S/FTP Patch Cord Value 21.99.1273 7m Halogen-Free Green

S/FTP, Cat6, 7m patch cord with RJ‑45 connectors on both ends, intended for use as a patch cable in wiring cabinets or as a direct connection between devices. The cable is flexible for narrow bends and wired 1:1 according to EIA/TIA 568 with 8 stranded copper conductors and a braided shield. Jacket material is LSOH (Low Smoke Zero Halogen), which limits smoke emission and contains no halogens under high heat. Characteristic impedance: 100 Ω. The cable and plug combination has been laboratory tested in a 100 m channel and meets Class E requirements.

Advantages

The Value S/FTP Patch Cord Cat.6 (7 m) provides shielded transmission to reduce electromagnetic interference and crosstalk. Its stranded copper conductors and braided shield ensure reliable connectivity and signal integrity in typical network environments. The LSOH jacket improves safety in enclosed spaces by limiting smoke and avoiding halogen emissions. The green color allows easy identification within cabling installations.

Suitable for

• Patching between switches, patch panels and network devices in wiring cabinets
• Direct device-to-device connections where a 7 m reach is required
• Structured cabling installations that require halogen‑free materials and shielded Cat6 performance

Key specifications

• Standard: Cat6 (Class E)
• Shielding: S/FTP (braided overall shield with individually shielded pairs)
• Length: 7 m
• Connectors: RJ‑45 on both ends, contact wiring 1:1 (EIA/TIA 568)
• Conductor: 8 stranded copper wires
• Impedance: 100 Ω
• Jacket: LSOH (Low Smoke Zero Halogen)
• Brand / MPN / EAN: VALUE / 21.99.1273 / 7611990114351

How to use

Plug the RJ‑45 connectors into the corresponding ports of your network devices, patch panel or switch. Ensure connectors are fully inserted and latched. Route the cable without sharp bends and avoid tight kinks; the flexible stranded construction permits reduced bend radius but maintain good cable management to prevent stress on terminations. Use shielded panels and ports for full S/FTP performance.

Usage recommendations

For a complete structured cabling channel we recommend using compatible shielded components (Cat.6 S/FTP solid cable, shielded wall jacks and shielded patch panels) and keeping total channel length within 100 m to maintain Class E performance.