S/FTP Patch Cord VALUE Cat.6 halogen-free blue 10m

S/FTP Patch Cord VALUE Cat.6 halogen-free blue 10m is a shielded twisted-pair patch cable with RJ-45 plugs on both ends, intended for patching in wiring cabinets or for direct device-to-device connections. The cable has 8 stranded copper conductors and a braided shield, an impedance of 100 Ω and is jacketed with LSOH (Low Smoke Zero Halogen) material to limit smoke and avoid halogen emissions under high heat.

Advantages

The S/FTP design and braided shield reduce electromagnetic interference and crosstalk, supporting reliable data transmission at Class E (Cat.6) performance over standard channel lengths. Flexible stranded conductors allow narrow bending radii for use in confined spaces. The LSOH jacket improves safety in enclosed environments by emitting limited smoke and no halogens if exposed to fire.

Suitable for

• Patching in wiring cabinets and racks
• Direct connections between network devices (switches, routers, PCs)
• Structured cabling installations requiring Cat.6 performance and halogen-free materials
• Environments where reduced smoke and halogen-free characteristics are required

Key specifications

• Standard: Category 6 (Class E) channel compliant
• Topology: S/FTP (shielded Foiled Twisted Pair) with braided shield
• Conductors: 8 stranded copper wires
• Contact wiring: 1:1 (EIA/TIA 568)
• Impedance: 100 Ohm
• Jacket: LSOH (Low Smoke Zero Halogen)
• Connector: RJ-45 plugs on both ends
• Length: 10 m
• Color: blue

How to use

Connect RJ-45 plugs to the corresponding ports on network devices or patch panels using a straight-through 1:1 wiring scheme. Route the cable with attention to bend radius — the stranded, flexible construction allows tighter bends but avoid sharp kinks. For structured cabling, include the patch cord as part of a channel not exceeding 100 meters total to maintain Class E performance as verified by laboratory testing.

Usage recommendations

For best results in a structured cabling system, pair this patch cord with compatible Cat.6 components (solid-cable runs and shielded patch panels/jacks) and follow installation standards (EIA/TIA 568). Avoid running the cable in parallel with high-power mains to minimize interference.