PoE Injector VALUE 30W Gigabit

The VALUE PoE Injector 30W Gigabit supplies power and data over a single Ethernet cable, enabling devices such as IP cameras, access points, switches and IP phones to operate without a separate power source. The injector is Gigabit compliant and supports IEEE 802.3at and IEEE 802.3af standards while providing an output of up to 55 V and 30 W.

Advantages

The device integrates internal current limiting and short-circuit protection as well as over-current and over-voltage protection to safeguard connected equipment. It supports data rates of 10/100/1000 Mbit/s, uses RJ-45 connectors and features LED indication for PSE status. The housing is made of steel and the package includes the injector, power cable and manual.

Suitable for

• Powering network cameras (IP cameras)
• Supplying wireless access points
• Feeding workgroup switches and small PoE switches
• Powering VoIP/IP phones

Key specifications

• Standards: IEEE 802.3at, IEEE 802.3af
• Output voltage: 55 V
• Maximum output power: 30 W
• Data rate: 10/100/1000 Mbit/s (Gigabit)
• Connectors: RJ-45
• Protections: over-current, over-voltage, short-circuit, internal current limit
• Indicators: LED for PSE
• Casing material: steel
• Contents: injector, power cable, manual

How to use

Connect the injector’s data+power output RJ-45 port to the PoE device using a standard Ethernet cable. Plug the injector into AC mains using the supplied power cable and connect the network switch or router to the data input RJ-45 port. Verify LED indication for PSE to confirm power delivery. Ensure the connected device’s PoE class and power draw do not exceed the injector’s 30 W maximum.

Usage recommendations

Use shielded or unshielded Cat5e/Cat6 cables for Gigabit performance and keep cable runs within Ethernet specifications. Confirm compatibility with IEEE 802.3at/af devices and avoid connecting loads that exceed 30 W to ensure reliable operation and protection.