Underfloor Heating Mat Veria VERIA-150 by Veria, model 189B0170

Veria VERIA-150 underfloor heating mat (model 189B0170) is a pre-fabricated electric heating mat designed to be installed beneath tile or other suitable floor coverings to provide consistent radiant heat. The thin, low-profile mat integrates with common thin-set or self-levelling screeds and is intended for use in residential and light commercial environments where an electric underfloor heating layer is preferred for renovation or new-build projects.

Advantages

The Veria VERIA-150 offers an evenly distributed heating surface with a low installation profile that keeps floor buildup minimal. Supplied as a factory-made mat, it reduces on-site layout time compared with loose cable installations and ensures consistent electrical spacing of the heating elements. The product is suitable for direct embedding under tiles and other stable coverings when installed according to manufacturer and tile adhesive recommendations.

Suitable for

• Bathrooms and wet rooms under tile or natural stone coverings
• Kitchen areas where a thin heating layer is required
• Renovation projects where existing floor height must be preserved
• Small to medium-sized rooms in residential and light commercial settings

When it may not be suitable

This electric heating mat is not intended as a primary structural floor layer and should not be used under flexible or unstable floor coverings that could compromise adhesion. It may not be suitable for very large open-plan areas where zoned control or higher power density solutions are required. Installation is dependent on having a compatible floor covering and appropriate thermal insulation beneath the mat to achieve efficient operation.

Key specifications

• Type: Factory-made electric underfloor heating mat
• Heating element layout: pre-spaced heating cable bonded to a mesh carrier
• Installation method: embedded in thin-set adhesive or levelling compound beneath tiles or similar coverings
• Application: residential and light commercial floor heating
• Profile: low-profile mat designed to minimise additional floor build-up

How to use

Prior to installation, verify the subfloor is flat, clean and structurally suitable for tile or chosen floor covering. Lay out the mat according to the planned heating zones, cutting and turning only the mesh carrier where permitted; do not cut the heating cable. Fix the mat to the substrate and embed it in the recommended thin-set mortar or levelling compound, then install the final floor covering. Electrical connections and the installation of a compatible thermostat and sensor must be carried out by a qualified electrician in accordance with local regulations and the manufacturer's installation instructions.

What to consider before purchase

• Compatibility of intended floor covering (tiles, natural stone, etc.) with electric underfloor heating
• Availability of a suitable thermostat with floor sensor and required electrical supply
• Requirement for subfloor preparation and any additional insulation to improve efficiency
• Room size and layout to confirm the mat power and coverage meet heating needs

Usage recommendations

For best performance, install the Veria VERIA-150 mat with appropriate subfloor insulation, use a floor sensor for accurate temperature control, and programme heating schedules to match occupancy patterns. Have all electrical connections and commissioning performed by a certified electrician and follow tile adhesive manufacturer guidance when embedding the mat.