PoE Power Injector VERKADA HARDWARE ACC-POE-90W-EU — Indoor, AC 100–240 V, 90 W, 1 Output (Europe)

The VERKADA HARDWARE ACC-POE-90W-EU PoE power injector supplies up to 90 W from an AC 100–240 V mains input to a single Gigabit Ethernet PoE output. Designed for indoor use in European installations, this injector delivers inline power to PoE-enabled devices — such as high-power network cameras, wireless access points and small PoE switches — when a PoE-capable switch is not available. The compact unit accepts universal AC input voltages and provides a straightforward way to add power over Ethernet to one remote device without running separate power lines.

Advantages

This power injector supports up to 90 W on a single output, enabling the use of high-draw devices that require PoE++ or high-power PoE+ profiles. It is compatible with Gigabit Ethernet links, allowing simultaneous data and power delivery over a single cable. The unit’s wide AC input range (100–240 V) makes it suitable for use across European mains supplies, and its indoor design simplifies deployment in network rooms, cabinets or behind equipment racks. Installation requires minimal configuration: connect the injector between the network switch and the powered device.

Suitable for

• Powering high-power PoE cameras (PTZ or advanced IR models)
• Supplying indoor wireless access points requiring PoE++/high-wattage PoE
• Providing power to small PoE switches or extenders when only one powered device is needed
• Retrofitting single PoE devices in locations without PoE-capable network switches

Когда устройство может быть не подходящим

The single-output design is not suitable for deployments that need multiple powered devices from one injector; for multi-device installations, a PoE switch or multiple injectors will be required. This indoor-only injector is not intended for outdoor or exposed installations without additional environmental protection. It does not replace full PoE switch management features such as per-port monitoring and power scheduling.

Key specifications

• Power output: up to 90 W on a single PoE output
• Input voltage: AC 100–240 V
• Network interface: Gigabit Ethernet data pass-through
• Output type: Single-port PoE (power + data over one RJ45 cable)
• Installation: Indoor mounting, compact form factor

How to use

Install the injector in a dry, indoor location near the network switch and the device to be powered. Connect the mains supply (AC 100–240 V) to the injector, then connect a network cable from your switch to the injector’s data input port and a second Ethernet cable from the injector’s PoE output port to the powered device. Verify device boot and network connectivity. Ensure cables are rated for Gigabit speeds for optimal data performance and that the powered device supports the required PoE power level.

What to consider before purchase

• Confirm the powered device’s maximum power consumption and PoE class to ensure compatibility with a 90 W single output.
• Check that the installation location is indoors and that ventilation is adequate for the injector’s heat dissipation.
• Verify that your Ethernet cabling is Gigabit-capable (Cat5e or higher) if you require Gigabit data throughput.

Usage recommendations

For reliable operation, pair the injector with devices whose peak power demand does not exceed the injector’s 90 W capacity, use quality Cat5e/Cat6 cabling for both power and data, and mount the injector in a ventilated indoor space away from direct heat sources. For multiple-device deployments or centralized power management, consider a managed PoE switch instead of individual single-port injectors.