PoE Power Injector VERKADA HARDWARE ACC-POE-90W-NA — AC 100–240 V input, 90 W output, single output (North America)

The VERKADA HARDWARE ACC-POE-90W-NA is a PoE power injector that provides up to 90 W of power to a single powered device. Designed for North American electrical environments, it accepts an AC input voltage range of 100–240 V and delivers a dedicated PoE output compatible with high-power PoE++ devices. The unit is intended for situations where inline power is not available or where a midspan injector is preferred to supply cameras, wireless access points, or other PoE-enabled equipment.

Advantages

The injector supplies up to 90 W to a single port, supporting high-power devices that require IEEE 802.3bt Type 4 levels of power. Its wide AC input range supports flexible installation in locations with different mains voltages, and the single-output design simplifies cabling and deployment for one device per injector. The product is purpose-built for PoE deployments where reliable midspan power delivery is needed without modifying existing network switches.

Suitable for

• Powering high-power PoE++ cameras in installations without PoE switches
• Supplying outdoor or indoor wireless access points that require up to 90 W
• Midspan injection for single PoE-powered devices in branch offices, retail, or industrial sites
• Temporary or retrofit installations where adding PoE-capable switches is impractical

When it may not be suitable

This single-output injector is not intended to replace multi-port PoE switches when multiple devices must be powered from a single network location; in such cases a powered switch or multiple injectors will be required. It is also specified for North American deployments; while the AC input supports 100–240 V, local plug type and regional certification should be verified before use in other regions.

Key specifications

• Output power: up to 90 W to a single port
• PoE standard compatibility: IEEE 802.3bt Type 4 (PoE++)
• AC input range: 100–240 V
• Output type: single PoE data+power output (midspan injector)
• Typical use: powers PoE-enabled cameras, access points, and similar devices

How to use

Connect the injector to an AC mains outlet using the appropriate regional power cord. Link a network switch or network source to the injector data input port, then connect the PoE output port to the powered device using appropriate Ethernet cabling (Cat5e or higher recommended for full PoE++ capability). Ensure the powered device is compatible with PoE++ and that cable runs meet distance and quality requirements for high-power delivery. Verify power delivery and device operation after connection.

What to consider before purchase

• Ensure the powered device supports IEEE 802.3bt (PoE++) and requires up to 90 W
• Confirm regional plug compatibility and any local electrical certifications needed for North America
• Plan for cable type and length — use Cat5e/Cat6 or better and account for voltage drop over long runs
• Consider whether a single-port injector meets your deployment needs versus a multi-port PoE switch

Usage recommendations

Use high-quality Cat5e or Cat6 cabling and keep Ethernet cable runs within recommended lengths for PoE++ deployments. If deploying outdoors or in harsh environments, protect the injector and cabling from moisture and extreme temperatures and follow local electrical codes. For multi-device sites, evaluate centralized PoE switching to simplify power management.