Verto 15G062 hand tool shaft/handle/adapter

Wooden Handle Verto 38×100 mm, Beech Straight for Shovel (model 15G062) is a straight beech replacement handle designed to fit standard shovel heads. The handle has a rectangular cross-section of approximately 38 × 100 mm, offering a firm and ergonomic grip for digging, lifting and earth-moving tasks. Constructed from beech wood, the handle balances stiffness and resilience to provide consistent performance during gardening, construction and landscaping work.

Advantages

The beech construction delivers a solid feel and good resistance to bending under load while remaining manageable in weight. The straight profile and the specified cross-section ensure secure mounting with many common shovel heads and compatible fittings. The wood surface can be finished or treated to improve durability and grip, and the replacement handle simplifies maintenance by restoring original tool geometry without replacing the entire shovel.

Suitable for

• Replacing worn or broken shovel handles
• Gardening tasks such as digging, transplanting and soil turning
• Construction and building site use for loading and moving loose materials
• Landscaping jobs including soil preparation and edging

Key specifications

• Material: solid beech wood
• Shape: straight handle
• Cross-section: 38 × 100 mm (approximate rectangular profile)
• Intended use: shovel replacement handle
• Finish: untreated wood (can be sanded, stained or lacquered as needed)

How to use

Measure the mounting hole or socket on the shovel head to confirm compatibility with the 38 × 100 mm cross-section. If necessary, trim or sand the end of the handle for a tight fit, then insert the handle into the shovel head socket and secure it using the original fixing pin, rivet or bolt provided with the shovel head. Ensure the connection is firm and test the assembled tool under light load before full use. Treat the wooden surface with oil or varnish if additional protection against moisture or wear is required.

Usage recommendations

Store the handle in a dry, ventilated location to reduce moisture uptake and prevent warping. Regularly inspect the joint between handle and shovel head for looseness and tighten or replace fixing hardware as necessary. For prolonged service life, apply a protective finish and avoid prolonged exposure to standing water or direct ground contact when not in use.