Submersible Pump Verto 52G441

The Verto 52G441 submersible pump is a compact electric unit with a 400 W motor designed for handling clean and dirty water with particle sizes up to 35 mm. Capable of delivering up to 7,500 litres per hour, the pump operates from a 230 V, 50 Hz AC supply and is suitable for temporary or permanent immersion to a maximum depth of 5 m. The device includes automatic level-controlled switching, an IPX8 waterproof rating, a long copper power cord and a carrying handle. The pump is supplied with a pipe stub and blanking plug and meets applicable European safety standards.

Advantages

The Verto 52G441 combines a high flow rate with a relatively compact footprint and sturdy construction for reliable water removal. Its 400 W motor provides consistent performance while the IPX8 protection and copper power cord enhance durability in submerged applications. Automatic on/off switching based on water level reduces the need for manual supervision, and included accessories simplify installation.

Suitable for

• Draining flooded cellars, garages and low-lying areas
• Emptying rainwater collection points and water reservoirs
• Transferring non-potable water from ponds or basins
• Temporary site dewatering for construction or maintenance

Key specifications

• Motor power: 400 W
• Maximum flow rate: 7,500 l/h
• Maximum immersion depth: 5 m
• Maximum delivery (head) height: 5 m
• Maximum particle size: 35 mm
• Protection rating: IPX8
• Supply voltage and frequency: 230 V, 50 Hz
• Automatic level-controlled on/off switching
• Colour: black and green
• Includes pipe stub and blanking plug

How to use

Before use, inspect the pump, power cord and accessories for damage. Fit the pipe stub or suitable delivery hose to the outlet and secure the connection. Place the pump in the water on a stable surface, ensuring maximum immersion depth of 5 m is not exceeded and that solids do not exceed the permitted particle size. Connect to a 230 V, 50 Hz supply and allow the automatic switch to activate the pump as water level rises; the unit will stop automatically when the level falls below the switching point. Avoid running the pump dry and disconnect the power before performing any maintenance.

Usage recommendations

Use the Verto 52G441 for non-potable water only; it is not intended for drinking water or food-related applications. Regularly check and clean the inlet and impeller area to prevent clogging by debris. For prolonged storage, drain the pump, clean components and store in a dry place. Observe local electrical safety regulations and use residual-current protection where required.