Fence Posts VidaXL set of 26, galvanized steel, Ø32 mm, 150 cm, grey

Set of 26 VidaXL fence posts, each made from galvanized steel with a 32 mm outer diameter and a length of 150 cm. Finished in grey, these posts are intended to support garden fencing, perimeter barriers and other lightweight fence systems. The galvanised steel construction provides basic protection against corrosion, and the straight tubular profile fits common fittings for wire mesh, panels or slats used in domestic and small commercial installations.

Advantages

These fence posts combine a uniform tubular shape and galvanised surface to offer straightforward, low-maintenance support for a variety of fence types. Their 32 mm diameter provides a stable mounting point for standard mesh and panel fixings while the 150 cm length is suitable for many above-ground garden applications. The grey finish gives a neutral aesthetic that integrates with different outdoor environments.

Suitable for

• Mounting wire mesh fences for gardens and allotments
• Fixing light fence panels or horizontal slats
• Temporary or permanent property boundary marking
• DIY fence projects where modular tubular posts are required

When it may not be suitable

These posts are intended for light to moderate fencing applications. They are not designed for supporting very heavy panels, high wind-load structures, or gates that require substantial hinge loads. For applications that demand greater structural strength or longer buried depth, heavier-duty posts or posts with larger diameters and thicker walls should be chosen.

Key specifications

• Quantity: 26 posts
• Material: galvanised steel
• Outer diameter: 32 mm
• Length: 150 cm
• Surface finish: grey

How to use

Plan the fence line and mark post positions at regular intervals appropriate to the chosen infill (commonly 1.5–2.5 m). Prepare the ground by digging post holes or using concrete footings depending on soil type and required permanence. Install each post vertically, ensuring correct alignment and level, and secure in place with concrete or mechanical anchors. Attach wire mesh, panels or slats to the posts using compatible clamps, screws or ties; follow the fastener manufacturer’s guidance for load and corrosion compatibility. Trim or cap posts if necessary to match the finished fence height and to prevent water ingress.

What to consider before purchase

• Confirm post spacing and the type of fence infill to ensure 32 mm diameter posts are compatible.
• Check soil conditions and decide whether concrete footings or driven posts are appropriate.
• Determine if a longer or thicker post is needed for heavier panels, gates or high-wind locations.
• Plan for appropriate fasteners and any post caps or protective treatments for additional longevity.

Usage recommendations

For typical garden fences, set posts in concrete to a depth of at least one quarter of the total length for stability. Use stainless or coated fasteners to preserve galvanised surfaces and maintain appearance. Periodically inspect the posts and fixings for signs of wear or localized corrosion, and replace or treat affected parts promptly to extend service life.