Fence panel VidaXL Euro with 7 spike anchors 0.4 x 10 m galvanized steel

vidaXL Euro fence panel is a 0.4 x 10 m galvanized steel panel supplied with seven spike anchors for straightforward ground fixing. The panel is intended for creating temporary or permanent boundary fencing, site protection and crowd control. The galvanized finish helps resist corrosion and extends the service life when used outdoors in typical conditions.

Advantages

The galvanized steel construction provides durability and resistance to rust, while the included spike anchors enable quick installation into soil or soft ground without the need for concrete foundations. The 0.4 x 10 m dimensions make the panel suitable for covering long runs efficiently and reduce the number of joints. The panel’s design supports both temporary and semi-permanent setups and can be combined with other panels to form continuous barriers.

Suitable for

• Temporary perimeter fencing at construction sites
• Event crowd control and security barriers
• Creating exclusion zones or protecting work areas
• Boundary marking on soft ground, grass or compacted soil

When it may not be suitable

This fence panel is designed primarily for installation into soil or other relatively soft ground using spike anchors; it may not be suitable where hard surfaces such as concrete, asphalt, or rocky ground prevent anchor penetration. For locations with very high wind loads or where a permanent, heavily reinforced fence is required, additional foundations or alternative mounting methods should be considered.

Key specifications

• Material: Galvanized steel
• Overall dimensions: 0.4 m (height) x 10 m (length)
• Number of spike anchors included: 7
• Finish: Galvanized (corrosion-resistant coating)
• Intended mounting: Spike anchors for soil or soft ground

How to use

Select a straight, level run and mark positions for the panel anchors. Push or drive the supplied spike anchors into soil or soft ground at the recommended anchor locations until secure, then mount the fence panel onto the anchors and ensure it sits evenly along its length. Adjacent panels can be aligned and joined as required to create a continuous barrier. Regularly inspect anchor stability and panel condition, especially after severe weather.

What to consider before purchase

• Ground type at the installation site (suitable for soil, grass, soft ground)
• Exposure to wind and weather and whether additional anchoring is needed
• Required total fence length and number of panels to achieve it
• Local regulations for temporary fencing or event barriers

Usage recommendations

For best results, prepare the ground by removing large stones and compacting soft spots; use a rubber mallet or appropriate driving tool to install spike anchors firmly. Where higher stability is needed, consider supplementary stakes or anchoring to heavier supports. Periodic checks for corrosion and anchor movement will help maintain fence performance and safety.