Wire Mesh Fence with 7 Driven Anchors 0.6 x 10 m, VidaXL, Galvanized Steel

VidaXL wire mesh fence panel measuring 0.6 x 10 m is made from galvanized steel and supplied with seven driven anchors for secure ground fixing. The panel provides a simple, corrosion-resistant barrier suitable for defining boundaries, protecting garden beds, or creating temporary enclosures. The included driven anchors allow straightforward installation in soil without separate post foundations, making this product a practical option for short-term and semi-permanent fencing needs.

Advantages

The galvanized steel construction offers resistance to rust and weathering, extending the service life of the fence in outdoor conditions. The full-width 10 m panel reduces the number of joins and installation time compared with multiple shorter panels. Seven driven anchors are provided to ensure the panel remains stable once installed in typical garden or construction-site soils. The relatively low height of 0.6 m makes the panel unobtrusive while still providing clear demarcation and a physical deterrent for small animals.

Suitable for

• Garden edges and flower beds to separate planting areas
• Temporary perimeter marking on construction sites
• Small livestock or poultry containment where low fencing is adequate
• Event crowd-flow guidance or short-term barrier use
• Property line demarcation and general outdoor enclosure needs

When it may not be suitable

The 0.6 m height is not sufficient for containing larger livestock or for security applications where climbing or jumping is a concern. The driven anchors are designed for installation in soil and may not be appropriate for hard surfaces such as concrete, asphalt, or very rocky ground without additional fixing hardware. For permanent, high-security, or heavy-duty applications a taller fence or a system with concrete-filled posts may be more appropriate.

Key specifications

• Material: Galvanized steel mesh
• Panel dimensions: 0.6 m (height) x 10 m (length)
• Surface finish: Zinc galvanization for corrosion resistance
• Fixing method: Seven driven ground anchors included
• Typical use: Outdoor boundary and temporary enclosure

How to use

Position the panel along the desired line and mark anchor locations according to the included anchors’ spacing. Drive each anchor into the soil to the recommended depth until the fence base is stable and evenly supported. Adjust the panel orientation and tension as needed to maintain a straight line and proper alignment. For uneven ground, level the panel by adjusting anchor depths or by selecting a slight slope in the run. If installing across hard or compacted surfaces, prepare additional mounting points or use alternative fixings compatible with the surface type.

What to consider before purchase

• Confirm that a 0.6 m height meets your containment or demarcation requirements
• Check ground conditions to ensure driven anchors can be used effectively
• Decide whether a single 10 m panel or multiple shorter panels better fits your layout
• Assess whether additional panels or corner/fixing accessories are needed for continuous runs

Usage recommendations

For best results install the panel into firm, moderately compacted soil and periodically inspect anchor stability. In coastal or highly humid environments consider additional protective measures or more frequent inspections to maintain the galvanized finish. When joining multiple panels, overlap or secure edges as required to maintain continuity and reduce gaps that small animals could exploit.