Wire mesh fence VidaXL with 13 posts 0.6 x 50 m galvanized steel

vidaXL welded wire mesh fence with 13 posts (0.6 x 50 m) is a galvanized steel perimeter solution intended for basic containment and demarcation. The product consists of a continuous welded mesh panel in a 0.6 m height spanning a total length of 50 m, and 13 evenly spaced posts for anchoring the mesh along mostly straight runs. Galvanized steel construction improves resistance to corrosion and is intended for outdoor use in gardens, yards, allotments or temporary site division.

Advantages

The galvanized finish protects the welded wires and posts from rust, extending the expected outdoor service life compared with non‑treated steel. The fence comes as a long continuous roll with multiple posts included, which reduces the number of separate components to order and simplifies planning for a linear installation. The low 0.6 m height makes the system unobtrusive while still providing a visible boundary and light containment for small animals or garden areas.

Suitable for

• Marking property lines, garden beds and allotments
• Light containment of small animals such as rabbits or poultry
• Temporary perimeter division at construction or landscaping sites
• Low decorative barriers around shrubs, play areas or pathways

When it may not be suitable

This welded wire mesh fence is not designed for high security or to restrain larger, strong animals; its 0.6 m height and mesh strength are intended for light containment only. It is best used on relatively level and straight sections — extensive curves, steep slopes or uneven terrain will require additional planning, cutting of the mesh and closer post spacing to maintain stability.

Key specifications

• Material: galvanized steel
• Overall dimensions: 0.6 m (height) × 50 m (length)
• Included components: welded wire mesh roll and 13 posts
• Suitable mounting: ground posts for linear runs
• Primary use: outdoor perimeter and garden barrier

How to use

Position the posts at roughly equal intervals along the intended line and ensure the route is clear of large obstructions. Anchor the first post firmly, unroll the mesh to the next post and fix the mesh to each post using appropriate fasteners or ties. Tension the mesh slightly between posts to reduce sagging; cut and join the mesh at the final post if needed. For sloped terrain, step the fence or add intermediary posts, and check alignment and firmness after installation to ensure stability.

What to consider before purchase

• Measure the total perimeter length to confirm a 50 m roll is sufficient or whether additional rolls are required
• Assess ground conditions and slope to determine post spacing and any extra support needed
• Decide whether the 0.6 m height meets containment and visibility requirements for intended use
• Plan for the correct fasteners and tools (post drivers, tensioning tools, wire ties or clips)

Usage recommendations

For best results, install on a cleared, level line and use corrosion‑resistant fasteners. Inspect the galvanized coating periodically and touch up any damaged areas to maintain longevity. If you need greater height or stronger containment, consider overlapping or stacking additional panels or choosing a taller, heavier‑gauge fencing option.