Welded Garden Fence with 13 Driven Anchors VidaXL 0.6 x 25 m Galvanized Steel

The Welded Garden Fence with 13 Driven Anchors VidaXL 0.6 x 25 m is a panel-based boundary solution made from galvanized steel. With a total length of 25 metres and a height of 0.6 metres, this welded fence is intended for marking property lines, enclosing gardens, lawns or small outdoor areas. The included driven anchors allow for secure, direct installation into the ground without a need for concrete posts, while the galvanized finish provides corrosion resistance for outdoor use.

Advantages

This welded garden fence offers a balance of rigidity and simplicity: welded mesh panels deliver stable structure and uniform appearance, while the set of 13 driven anchors simplifies placement and reduces installation time. Galvanized steel construction increases durability and resists rust, making the fence suitable for typical outdoor conditions. The panel system enables modular installation along long borders and straightforward cutting or joining where minor adjustments are required.

Suitable for

• Defining property boundaries and garden perimeters
• Securing lawns, flower beds and small vegetable plots
• Temporary or semi-permanent enclosures for pets or children
• DIY landscaping projects and low-height barriers

When it may not be suitable

Because the panel height is 0.6 m, this fence is not intended for high-security applications or to contain larger animals that can jump or climb. It may not be appropriate in locations with very soft, waterlogged, or frozen ground where driven anchors cannot be installed reliably without additional groundwork. For applications requiring decorative finishes, painted surfaces, or tall visual screening, alternative fence types should be considered.

Key specifications

• Material: galvanized steel
• Total length: 25 m (panel-based)
• Height: 0.6 m
• Installation method: driven anchors included (13 pieces)
• Construction: welded mesh/panel design
• Intended use: outdoor boundary and enclosure

How to use

Plan the fence line and mark positions for each panel and anchor at regular intervals along the 25 m span. Drive the supplied anchors into firm ground at the marked positions using a suitable hammer or post driver until they reach the required depth. Attach the welded panels to the anchors according to the manufacturer’s alignment and fastening recommendations, ensuring panels are level and joined securely. For uneven terrain, adjust panel placement or use short connecting sections to maintain a straight line. No concrete footings are required for standard soil conditions if anchors are installed correctly.

What to consider before purchase

• Confirm the 0.6 m height meets your containment or privacy requirements
• Check ground conditions to ensure driven anchors can be installed
• Measure the perimeter to verify 25 m total length is sufficient or if multiple packs are needed
• Consider local regulations or property boundary agreements before installation

Usage recommendations

For best results install anchors in firm, unfrozen soil and periodically inspect anchor stability and galvanization for signs of damage. Where increased stability is required, combine driven anchors with ground sleeves or short concrete footings at interval points. When cutting or modifying panels, treat exposed metal edges to delay corrosion and maintain safety when used around children or pets.