Welded Wire Fence VidaXL with 13 Spike Posts Gray 0.4 x 25 m Steel

The Welded Wire Fence VidaXL with 13 Spike Posts Gray 0.4 x 25 m Steel is a prefabricated perimeter fencing system intended for delineation and light containment. The product consists of a welded steel mesh panel 0.4 m high and 25 m long, supplied with 13 spike-style posts for direct ground mounting. The welded construction of the mesh adds rigidity while the spike posts enable quick installation in soil without pouring concrete foundations.

Advantages

This welded wire fence offers a durable steel structure that resists deformation under normal outdoor conditions and provides a straightforward, low-complexity installation process. The included spike posts reduce the need for additional post fixtures or heavy groundwork, making it possible to erect the fence quickly along gardens, yards or temporary work zones. The gray finish blends with many outdoor environments and requires minimal maintenance compared with untreated materials.

Suitable for

• Garden perimeter marking and boundary separation
• Light containment of small animals or pets
• Temporary or semi-permanent site enclosures for construction or landscaping
• Separating areas within yards, allotments or public green spaces

When it may not be suitable

This welded wire fence is not intended for heavy-duty security applications such as high-risk perimeter protection or locations requiring anti-climb, anti-cut or ballistic performance. Due to its 0.4 m height, it is not suitable where a taller barrier is required for privacy or to contain larger animals. Ground conditions with solid rock, very compacted soil or frozen ground may prevent spike post installation without digging or using alternative foundations.

Key specifications

• Material: steel welded wire mesh
• Overall dimensions: 0.4 m (height) x 25 m (length)
• Finish: gray coating
• Posts supplied: 13 spike-style ground posts
• Mounting method: spike posts driven into soil (no concrete foundations required for typical soil)

How to use

Position the fence line and mark post locations according to the included spacing or desired intervals. Drive the spike posts into the soil until stable, using a suitable tool or mallet and taking care to keep posts vertically aligned. Unroll or position the welded wire panel along the installed posts and attach the panel to the posts using appropriate fasteners or ties. Check alignment and tension along the length, and trim excess mesh or adjust post depth where necessary. For firm or rocky ground, excavate post holes or use an alternative anchoring method prior to mounting.

What to consider before purchase

• Intended use: suitability for light containment and perimeter marking rather than heavy security
• Ground conditions: spike posts require soil that can accept driven posts or may need pre-drilling
• Height requirement: 0.4 m may be insufficient for privacy or larger animals
• Quantity and layout: ensure 25 m length and 13 posts fit the planned line and gaps

Usage recommendations

For best results, install on moderate soil using a rubber mallet to protect posts, attach mesh with corrosion-resistant ties or clamps, and periodically inspect fastening points and coating for wear, especially in high-moisture environments.