Welded Wire Fence VidaXL 1 x 50 m with 13 Flanged Posts, Galvanized Steel

The Welded Wire Fence VidaXL 1 x 50 m with 13 Flanged Posts, Galvanized Steel is a ready-to-install fencing solution comprising a 1 m high by 50 m long galvanized welded mesh panel and thirteen posts with flange bases. The galvanized steel construction offers basic corrosion protection for outdoor perimeter marking, garden enclosures and light property protection. Flanged posts are supplied to allow attachment to flat surfaces with screws or anchors, enabling installation on concrete, paving or timber decking when appropriate fixings are used.

Advantages

This welded wire fence provides a consistent and open mesh that balances visibility and boundary definition. Galvanized steel improves resistance to rust and reduces maintenance compared with untreated metal. The included flanged posts simplify mounting on flat substrates and remove the need for digging post holes in some installations. The set is lightweight relative to solid panel fencing, which can make handling and positioning easier for two people.

Suitable for

• Marking property boundaries and perimeter delineation
• Garden enclosures to protect plants or separate areas
• Temporary or semi-permanent fencing on patios, driveways or concrete surfaces
• Light-duty animal containment for small pets with additional top/bottom fixing if required

When it may not be suitable

This welded wire fence is not designed for high-security applications or to contain large, strong animals without supplementary reinforcement. It does not provide full privacy due to its open mesh design, and it may not be suitable where noise reduction or visual screening is required. For long-term installations in highly corrosive environments (for example, close to saltwater) additional protective measures may be necessary.

Key specifications

• Panel dimensions: 1 m height × 50 m length
• Material: Galvanized steel mesh and galvanized posts
• Number of posts included: 13 with flange bases for surface mounting
• Mounting method: Flange bases for screw or anchor fixing to flat substrates
• Typical uses: Perimeter marking, garden enclosures, light property protection

How to use

Position the fence along the desired boundary and mark the flange locations at regular intervals matching the included post spacing. Secure each flanged post to the flat surface using suitable screws or anchors selected for the substrate (concrete anchors for concrete, coach screws for timber, etc.). Unroll or unstack the welded mesh and attach it to the posts using appropriate fasteners such as stainless-steel ties, clips or corrosion-resistant wire. Ensure the mesh is tensioned evenly and that bottom edges are fixed to prevent lifting. Regularly inspect fixings and mesh for damage or corrosion and tighten or replace fastenings as needed.

What to consider before purchase

• Confirm the 1 m height and 50 m length suit your boundary and local regulations
• Verify the mounting substrate (concrete, paving, timber) and choose correct screws or anchors
• Consider whether additional reinforcement or taller fencing is required for animal containment or security
• Assess exposure to corrosive environments and whether extra protective coatings are needed

Usage recommendations

For a durable installation, use corrosion-resistant fasteners and, where possible, seal cut edges or connection points with suitable corrosion-inhibiting coatings. Where animal containment is required, reinforce the base and add top rails or tension wires to reduce sagging and improve stability.