VidaXL Hexagonal Garden Fence with 13 Spike Posts 1 x 25 m Galvanized Steel

VidaXL Hexagonal Garden Fence with 13 Spike Posts 1 x 25 m Galvanized Steel is a low garden barrier designed to define borders and protect flowerbeds, pathways and small lawn areas. The fence is made of galvanized steel in a hexagonal mesh pattern and comes with 13 spike posts that allow direct installation into soil for a stable, ground-fixed perimeter measuring approximately 1 m in height and 25 m in length.

Advantages

The galvanized steel construction provides basic corrosion resistance suitable for outdoor use and reduced maintenance compared with untreated metal. The hexagonal mesh design offers a balance between visibility and containment, allowing plants and views to remain unobstructed while creating a physical boundary. Spike posts enable straightforward installation without the need for concrete footings, and the modular length allows trimming or joining multiple sections to adapt to typical garden layouts.

Suitable for

• Defining garden borders and bed edges
• Protecting flowerbeds from light foot traffic and pets
• Creating low enclosures around pathways or vegetable patches
• Temporary or seasonal perimeter marking in lawns and parks

When it may not be suitable

This fence is intended as a low, lightweight barrier and is not designed for heavy-duty security, containment of large or strong animals, or applications that require significant load-bearing. It may not be suitable on very rocky, frozen, or extremely compacted ground where spike posts cannot be properly driven in. For tall privacy screening, heavy livestock containment or permanent, load-bearing fencing, consider higher-strength or differently anchored solutions.

Key specifications

• Material: Galvanized steel
• Shape of mesh: Hexagonal
• Overall dimensions: approximately 1 m (height) x 25 m (length)
• Number of spike posts: 13 for ground installation
• Finish: corrosion-resistant galvanization

How to use

Position the fence along the desired line and mark the locations for the spike posts at the recommended intervals. Drive each spike post into the soil until the fence height is stable and evenly tensioned along its length. Trim or adjust the fence sections if needed to fit corners or short runs; secure adjacent sections together according to the mounting points provided. Regularly inspect post stability and re-seat any posts that have shifted due to frost or soil movement.

What to consider before purchase

• Measure the installation area to confirm that 1 x 25 m coverage meets your perimeter needs or whether multiple rolls are required.
• Check ground conditions to ensure spike posts can be driven in (avoid solid rock, deep frost or very compacted surfaces).
• Decide if a low, partially transparent barrier meets your containment and privacy requirements.
• Plan for corner and end treatments where the fence meets walls, gates or taller structures.

Usage recommendations

For best results, install when soil is soft (spring or fall) and use a mallet or post driver for firm seating. Periodically clean off soil and debris from the galvanization to prolong corrosion resistance and check attachments after severe weather.