Fence panels VidaXL hexagonal wire fence 0.6x25 m, galvanized steel posts 32 mm Ø, 70 cm height, 13 posts

VidaXL hexagonal wire fence 0.6 x 25 m is a complete fencing set designed for marking boundaries, basic perimeter protection and light animal containment. The kit includes a continuous hexagonal mesh panel 25 metres long and 60 cm high together with 13 galvanized steel posts (32 mm outer diameter, 70 cm effective height) for mounting and stabilising the mesh. The galvanized steel construction provides corrosion resistance for typical outdoor use, while the slim profile and moderate height keep the fence visually unobtrusive in gardens and small properties.

Advantages

This fencing set combines a flexible hexagonal wire mesh with multiple galvanized posts to create a continuous barrier that is quick to install and requires only basic tools. The galvanized finish on both mesh and posts increases resistance to rust in outdoor conditions, reducing maintenance needs. The 25 m length and included posts offer a ready-to-fit solution for short to medium runs of boundary or garden fencing, and the low 60 cm height makes it suitable where visibility and a low-profile enclosure are preferred.

Suitable for

• Marking property boundaries and dividing garden areas
• Perimeter protection around yards, allotments and flower beds
• Basic containment for small animals such as rabbits, poultry or domestic pets
• Temporary or semi-permanent fencing for landscaping and DIY projects

When it may not be suitable

This hexagonal wire fence is not intended for high-security applications or locations requiring tall barriers; the 60 cm height provides only minimal obstruction and will not deter determined intruders. It is also not designed to contain large or strong animals that can jump or push through a low, lightweight mesh.

Key specifications

• Total fence length: 25 m
• Fence height: 0.6 m
• Included posts: 13 galvanized steel posts
• Post diameter: 32 mm (outer diameter)
• Post effective height: 70 cm
• Material: galvanized steel mesh and posts
• Mesh type: hexagonal wire (chicken-net style)

How to use

Determine the line where the fence will be installed and mark the positions for the posts at regular intervals consistent with the included post spacing. Drive or secure each galvanized post into the ground until stable; post bases or simple concrete footings can be used where additional support is required. Unroll the hexagonal wire mesh along the posts, align it at the desired height and fix the mesh to posts using wire ties, clips or staples suitable for metal. Trim excess mesh to fit the run and ensure all fixings are tight to prevent sagging. Inspect the fence after installation and tighten or adjust ties as needed.

What to consider before purchase

• Confirm the total length and height meet your boundary or containment needs
• Check soil conditions and determine whether standard post driving is sufficient or if concrete footings are needed
• Decide if the 60 cm height is adequate for intended animals or security level
• Ensure you have appropriate tools and fastenings (wire ties, clips, post driver) for installation

Usage recommendations

For longer-term installations, consider treating cut edges and fastening points with additional rust-inhibiting paint or coating to extend service life. Space posts evenly and tension the mesh during fixing to minimise sagging and maintain a neat appearance. For animal containment, add a buried skirt or lower strand to prevent digging underneath.