Fence posts set VidaXL 13 pieces 32 mm diameter 210 cm galvanized steel

Set of 13 VidaXL fence posts made from galvanized steel, each post measuring 32 mm in diameter and 210 cm in length. These posts are intended to support fencing panels, wire mesh, or garden barriers and are treated with a galvanised finish to improve corrosion resistance for outdoor use. The uniform dimensions ensure consistent alignment and stable fixation across linear runs of fencing.

Advantages

The posts combine a simple tubular design with a protective zinc coating, offering a balance of mechanical strength and resistance to weathering. Their 32 mm diameter provides adequate rigidity for typical garden fences and wire mesh, while the 210 cm length allows for sufficient ground anchoring and above-ground support. Supplied in a set of 13, the posts make it easier to plan and install a contiguous fence line with consistent spacing and appearance.

Suitable for

• Mounting wooden or metal fence panels
• Supporting welded or woven wire mesh fences
• Creating temporary or permanent garden boundaries
• Fixing to concrete or directly into soil with appropriate anchors

When it may not be suitable

This set may not be suitable for applications that require very high load-bearing capacity, such as retaining heavy gates or supporting large wind-exposed structures. The posts are standard tubular posts and are not reinforced for heavy industrial loads.

They are also not finished with decorative coatings; if a specific color or ornamental finish is required, additional surface treatment (painting or powder coating) will be necessary.

Key specifications

• Quantity: 13 posts
• Material: galvanized steel
• Outer diameter: 32 mm
• Length: 210 cm per post
• Finish: galvanised (zinc coating) for corrosion resistance

How to use

Select post spacing appropriate to the fence type, typically between 1.5 and 3 metres depending on panel or mesh rigidity. Dig holes or prepare anchors at the chosen intervals, ensuring a suitable depth for stability (commonly 40–80 cm depending on soil and local frost depth). Place each post vertically, check alignment and level, then secure with concrete or mechanical anchors. Attach panels, mesh or fittings to the posts using compatible brackets, screws or ties designed for metal posts.

What to consider before purchase

• Confirm required post length and burying depth for local soil and frost conditions
• Check compatibility of panel or mesh fixing systems with 32 mm diameter posts
• Decide if additional surface treatment (paint or coating) is needed for appearance
• Plan for appropriate anchors or concrete if installing into soil or onto hard surfaces

Usage recommendations

For long-lasting performance, install posts with adequate concrete footings and avoid direct contact between treated wood and galvanized surfaces to reduce risk of accelerated corrosion. Regularly inspect fixings and touch up any damaged galvanised coating to maintain protection.