Fence panel VidaXL welded painted steel 1.2 x 10 m Lumarko

Welded painted steel fence panel VidaXL (Lumarko) sized 1.2 x 10 m is a continuous perimeter element designed for outdoor fencing of gardens, yards and property borders. The panel consists of welded steel mesh and a painted protective surface, offering a rigid, long-span barrier suitable for forming straight runs or temporary enclosures. Its 1.2 m height and 10 m length make it practical for delineating larger areas while reducing the number of joints and posts required.

Advantages

The welded construction provides structural stiffness and resistance to deformation under moderate loads. The painted finish creates a protective layer that reduces corrosion risk and helps the panel withstand outdoor conditions. A long 10 m length enables fewer joins during installation, speeding up fence erection and delivering a continuous appearance along property lines. The product’s simple geometry allows compatibility with a range of common posts and fixings for standard fencing systems.

Suitable for

• Building continuous perimeter fences around gardens and residential yards
• Defining landscape beds, communal green spaces or sports perimeters
• Temporary enclosures for events, construction sites or site delineation
• Use where a low to medium height barrier (approx. 1.2 m) is required for boundary marking

When it may not be suitable

This welded painted steel panel is not intended for high-security applications where anti-climb or anti-cut features are required; it provides a visual and physical boundary but not CCTV-level security. It may also be unsuitable in highly corrosive environments (for example, close to saltwater spray) unless additional corrosion protection or suitable installation distance is applied.

Key specifications

• Material: welded steel mesh with painted finish
• Overall dimensions: height approximately 1.2 m, length approximately 10 m
• Finish: protective paint coating for outdoor use
• Construction: single-piece welded panel designed for long runs

How to use

Position the panel along the intended fence line and mark locations for support posts at regular intervals compatible with local wind loads and soil conditions. Lift the panel into place and secure it to the chosen posts using suitable clamps, brackets or welded connections depending on the post type. Ensure the panel is level and that adjacent panels or end posts are aligned to maintain a continuous line. For permanent installations, set posts in concrete and inspect fixings periodically for corrosion or loosening.

What to consider before purchase

• Measure the perimeter length and decide on post spacing to ensure compatibility with 10 m panel sections
• Check local zoning or building regulations regarding fence height and placement
• Assess site exposure to weather and consider additional corrosion protection for coastal or industrial locations
• Verify compatibility of chosen posts, clamps and foundations with welded panel dimensions

Usage recommendations

For best long-term performance, install panels with posts concreted below frost depth where relevant, use stainless or hot-dip galvanized fixings if in aggressive environments, and perform an annual inspection to touch up paint chips and tighten fittings.