Welded Fence Panel VidaXL 0.5 x 50 m Galvanized Steel

VidaXL welded fence panel, size 0.5 x 50 m, made from galvanized steel for outdoor perimeter and boundary use. The panel consists of welded wire mesh with consistent mesh spacing and a reinforced top and bottom edge. Galvanization provides corrosion resistance for extended outdoor exposure while the continuous 50 m length allows spanning medium to long runs without frequent joins. The product is intended for mounting on posts, frames or temporary supports to create garden enclosures, site boundaries or protection around planted areas.

Advantages

The welded construction offers uniform strength across the panel and resists sagging when properly supported. Galvanized steel coating reduces the risk of rusting and lowers maintenance needs compared with untreated steel. The 0.5 m height is suitable for low perimeter marking while the 50 m roll length minimises the number of connections required for medium-length fencing projects. The flexible yet stable wire mesh is compatible with common fixing methods such as wire ties, clips or fastening to wooden or metal posts.

Suitable for

• Garden boundaries and flowerbed protection
• Temporary enclosures at construction sites or events
• Perimeter marking around allotments and small holdings
• Animal enclosures for small livestock or domestic animals

When it may not be suitable

This welded fence panel is relatively low in height (0.5 m) and therefore not appropriate where higher security or full privacy screening is required. It is designed as a lightweight perimeter or containment solution rather than a heavy-duty security barrier. For permanent high-security applications or locations with heavy impact loads, a taller or more robust fencing system should be chosen.

Key specifications

• Material: Galvanized steel wire mesh
• Overall dimensions: 0.5 m (height) x 50 m (length)
• Construction: Welded-wire panel with reinforced edges
• Surface finish: Zinc galvanization for corrosion resistance
• Typical fixing: Compatible with ties, clips, staples or bolt-on brackets

How to use

Unroll the panel along the intended fence line and position it against prepared posts or a supporting frame. Ensure posts are spaced appropriately and set at suitable depth for stability. Attach the mesh to the posts with wire ties, metal clips or other mechanical fasteners, keeping the panel tensioned to reduce sagging. Trim excess at ends and make neat joins where two lengths meet by overlapping and tying together. For longevity, avoid direct contact with soil where possible or provide a small clear gap and consider additional protective coatings if used in highly corrosive environments.

What to consider before purchase

• Required height: 0.5 m may be insufficient for tall animals or high-security needs
• Mounting method and post spacing to ensure adequate support
• Exposure conditions: coastal or industrial environments may accelerate corrosion
• Number of panels/length needed and overlap allowance for joints

Usage recommendations

For best results, install the panels on evenly spaced, firmly set posts and maintain moderate tension to prevent sagging. Use corrosion-resistant fixings and check joins periodically; if the fence is close to the ground, provide a small separation or use a treated base to reduce long-term moisture contact.