Submersible dirty water pump VULCAN VPB750 750 W, max head 9 m, max flow 7 m³/h

The VULCAN VPB750 is a submersible dirty water pump with a rated power of 750 W, a maximum head of 9 m and a maximum flow rate of 7 m³/h. It is designed for temporary dewatering and handling of liquids containing suspended solids and debris. The pump is intended for draining flooded areas, emptying basements, removing water from construction sites, garden ponds and similar applications where water is contaminated with sand, silt or organic material.

Advantages

The VULCAN VPB750 combines a compact design with sufficient pumping capacity for small- to medium-sized dewatering tasks. Its motor power and hydraulic characteristics allow pumping at heights up to 9 m while maintaining a maximum flow of 7 m³/h. The construction is focused on handling dirty water with suspended solids, reducing the risk of clogging in short-term applications. The pump is suitable for intermittent use and for situations that require rapid removal of water from confined spaces.

Suitable for

• Draining flooded rooms and cellars
• Emptying construction site pits and trenches
• Removing water from garden ponds or rainwater collection areas with debris
• Temporary dewatering of garages and workshops

Key specifications

• Rated power: 750 W
• Maximum head: 9 m
• Maximum flow rate: 7 m³/h
• Application type: dirty water / suspended solids handling
• Operation mode: submersible

How to use

Place the VULCAN VPB750 pump into the water to the level recommended by the manufacturer, ensuring the pump is stable and fully submerged as required. Connect a suitable discharge hose or pipe to the outlet and route it to an appropriate drainage point. Connect the power supply according to local electrical safety rules and switch on the pump. Monitor the operation to ensure that the pump handles the suspended solids present and that the discharge path remains unobstructed. Turn off and remove the pump when dewatering is complete or when the water level falls below the minimum recommended level for safe operation.

Usage recommendations

Use a discharge hose of adequate diameter to maintain the pump's rated flow and reduce backpressure. Avoid continuous long-term operation in heavily contaminated liquids; the pump is intended for temporary or intermittent dewatering. Periodically inspect the pump and clean debris from the intake and impeller area to maintain performance and extend service life. Follow local electrical safety standards when connecting and operating the pump.